John Deere

John Deere 9200

The John Deere 9200 is a four-wheel drive (4WD) tractor produced from 1996 to 2001 as part of the 9000 Series. Built in Waterloo, Iowa, USA, it features a John Deere 10.5L 6-cylinder turbocharged aftercooled diesel engine producing 310 hp (231.2 kW). Transmission options include 12-speed partially synchronized, 24-speed partial power shift, and 12-speed full power shift. The tractor has a wheelbase of 137.8 inches (350 cm), weighs 31,015 lbs (14068 kg), and uses 20.8R42 tires front and rear. It includes a closed center PFC hydraulic system with 26 gal (98.4 L) capacity and a rear PTO with optional 1000 rpm. The 9200 is known for its robust mechanical features including hydrostatic power steering, hydraulic wet disc brakes, and a standard cab.

Power310 hp

Founded1996 - 2001

Model9200

View Images

Technical Specifications

Detailed specifications and technical data for John Deere 9200

Power

Engine power	310 hp (231.2 kW)
PTO (tested)	296.92 hp (221.4 kW)
PTO (claimed)	260 hp (193.9 kW)
Drawbar (tested)	246.46 hp (183.8 kW)

Engine

Model	John Deere 10.5L 6-cyl diesel
Power	310 hp (231.2 kW)
Details	turbocharged aftercooled diesel, 6-cylinder, liquid-cooled inline
Rated RPM	2100
Bore/Stroke	5.00x5.43 inches (127 x 138 mm)
Compression	16:1
Displacement	643 ci (10.5 L)
Oil capacity	44 qts (41.6 L)
Coolant capacity	56 qts (53.0 L)

Capacity

Fuel	270 gal (1022.0 L)
Hydraulic system	26 gal (98.4 L)

Electrical

Ground	negative
Batteries	3
Battery CCA	925
Battery volts	12
Charging amps	140
Charging system	alternator

Hydraulics

Type	closed center PFC
Valves	3 to 5
Capacity	26 gal (98.4 L)
Pressure	2900 psi (200.0 bar)
Pump flow	35 gpm (132.5 lpm)
Total flow	44 gpm (166.5 lpm)

Mechanical

Cab	standard
Drive	Four-wheel drive
Brakes	Hydraulic wet disc brakes
Steering	hydrostatic power
Final drives	inboard planetary

Production

Type	Four-wheel Drive (4WD) tractor
Series	9000 Series
Built in	Waterloo, Iowa, USA
Years produced	1996 - 2001

Transmission

Options	12-speed partially synchronized, 24-speed partial power shift, 12-speed full power shift
John Deere Syncro	Typepartially synchronized Gears12 forward and 3 reverse DescriptionThree speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range. Oil capacity147.2 qts (100mm axle) (139.3 L), 151.6 qts (110mm axle) (143.5 L), 151.2 qts (PTO 100mm axle) (143.1 L), 155.6 qts (PTO 110mm axle) (147.3 L)
John Deere PowrSync	Typepartial power shift Gears24 forward and 6 reverse DescriptionThree speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever. Oil capacity147.2 qts (100mm axle) (139.3 L), 151.6 qts (110mm axle) (143.5 L), 151.2 qts (PTO 100mm axle) (143.1 L), 155.6 qts (PTO 110mm axle) (147.3 L)
John Deere PowerShift	Typefull power shift Gears12 forward and 2 reverse Oil capacity64 qts (60.6 L), 60 qts (no PTO) (56.8 L), 120 qts (axles) (113.6 L)

Tractor hitch

Rear Type	III
Rear lift	13,871 lbs (6291 kg)

Serial Numbers

1997	1001
1998	10001
1999	20001
2000	30001
2001	40001
Serial number location	Serial number plate on the top-left of the tractor's hinge

Dimensions & Tires

Width	158 inches (duals) (401 cm)
Length	274 inches (695 cm)
Rear axle	3.94 by 120 inches (100 by 3048 mm), 4.31 by 120 inches (109 by 3048 mm)
Rear tire	20.8R42
Wheelbase	137.8 inches (350 cm)
Front axle	3.94 by 120 inches (100 by 3048 mm), 4.31 by 120 inches (109 by 3048 mm)
Front tire	20.8R42
Height (cab)	137.5 inches (349 cm)
Shipping weight	31,015 lbs (14068 kg)
Ground clearance	28.8 inches (axles) (73 cm)