Tractorpedia.com

Massey Ferguson 194

The Massey Ferguson 194 is a utility tractor built by Landini and distributed by Massey Ferguson from 1977 to 1983. It is part of the 104 Series and was manufactured in Italy. The tractor features a Perkins 4.1L 4-cylinder diesel engine producing 75 hp (55.9 kW). It offers two- or four-wheel drive options with a 12-speed partially synchronized transmission. The tractor includes mechanical rear differential lock, power steering, dry disc brakes, and an open operator station with an optional cab. Hydraulics are open center type with 2418 psi pressure and 7.5 gpm flow. The rear hitch is category II with position and draft control and a lift capacity of 5842 lbs (2649 kg). The PTO is independent with dry disc clutch and offers 540 and optional 540/1000 RPM speeds. Dimensions vary between 2WD and 4WD models, with weights ranging from 6041 to 6570 lbs. The tractor supports various tire options and has an optional 832 front-end loader attachment. Electrical system is 12 volts with negative ground.
Massey Ferguson 194Massey Ferguson tractor104 SeriesPerkins 4.1L engineutility tractorLandini builttractor specifications
Power75 hp
Founded1977 - 1983
Model194

Technical Specifications

Detailed specifications and technical data for Massey Ferguson 194

Power

Engine power:75 hp (55.9 kW)

Tires

2WD Standard tires (ag):Front: 7.50-20. Rear: 18.4/15-30
4WD Standard tires (ag):Front: 12.4/11-24. Rear: 18.4/15-30
2WD Optional tires (ag) 1:Front: 7.50-16. Rear: 16.9/14-30
2WD Optional tires (ag) 2:Front: 7.50-20. Rear: 16.9/14-34
2WD Optional tires (ag) 3:Front: 7.50-20. Rear: 13.6/12-38
4WD Optional tires (ag) 1:Front: 11.2/10-24. Rear: 16.9/14-30
4WD Optional tires (ag) 2:Front: 12.4/11-24. Rear: 16.9/14-34
4WD Optional tires (ag) 3:Front: 12.4/11-24. Rear: 13.6/12-38

Engine

Type:diesel
Model:Perkins A4.248
Power:75 hp (55.9 kW)
Torque:206.5 lb-ft (280.0 Nm)
Cooling:liquid-cooled
Starter:electric
Idle RPM:650-22600
Cylinders:4-cylinder
Fuel tank:16 gal (60.6 L)
Rated RPM:2100
Torque RPM:1380
Bore/Stroke:3.975x5.00 inches (101 x 127 mm)
Compression:16:1
Fuel system:direct injection
Displacement:248 ci (4.1 L)
Firing order:1-3-4-2
Starter volts:12
Coolant capacity:15.9 qts (15.0 L)

Height

Hood:57.3 inches (145 cm)
ROPS:92.9 inches (235 cm)
Steering wheel:65.5 inches (166 cm)

Variants

194:2WD
8500:similar Landini model
194-4:4WD

Dimensions

Width:69.7 inches Minimum width (177 cm)
2WD Length:146.7 inches (372 cm)
2WD Weight:6041 lbs (2740 kg)
4WD Length:150.8 inches (383 cm)
4WD Weight:6570 lbs (2980 kg)
Rear tread:51.2 to 79.7 inches (130 to 202 cm)
2WD Wheelbase:90.6 inches (230 cm)
4WD Wheelbase:89.4 inches (227 cm)
2WD Front tread:55.1 to 74.8 inches (139 to 189 cm)
4WD Front tread:61.2 inches (155 cm)
2WD Clearance (front axle):22.1 inches (56 cm)
4WD Clearance (front axle):16.5 inches (41 cm)

Electrical

Ground:negative
Battery volts:12

Hydraulics

Type:open center
Pressure:2418 psi (166.7 bar)
Total flow:7.5 gpm (28.4 lpm)

Mechanical

Drive:Two- or four-wheel drive
Brakes:Dry disc brakes
Power steering:Yes
Operator station:Open operator station. Cab optional.
Differential lock:mechanical rear

Production

Type:Utility tractor
Series:104 Series
Built in:Italy
Distributor:Massey Ferguson
Manufacturer:Landini
Years produced:1977 - 1983

References

1:Loaders - Compact and Agricultural published in 1989, by Massey Ferguson
2:Operator Instruction Book 154 - 174 - 184 - 194 (3300912M2) *
3:MF 194-4 4-Wheel Drive Tractor published in 1977, by Massey Ferguson
Note:*Publication contains known errors.

Attachments

Loader:832 Loader
Dump angle:35° dump
Dump reach:30 inches reach (dumped) (76 cm)
Bucket width:60 inches (152 cm), 72 inches (182 cm)
Ground reach:67 inches reach (ground) (170 cm)
Height at pin:115 inches height (at pin) (292 cm)
Lift capacity:2400 lbs lift (full at pin) (1088 kg)
Breakout force:2969 lbs breakout (1346 kg)
Dump clearance:93 inches clearance (dumped) (236 cm)
Rollback angle:17° rollback (ground line)

Transmission

Type:partially synchronized
Gears:12 forward and 4 reverse
Notes:Four synchronized gears in three ranges, plus reverse range. Tractor must be stopped, and clutch used, to shift range.
Clutch:279.4mm dry disc

Tractor hitch

Control:position and draft control
Rear Type:II
Rear lift (at ends):5842 lbs (2649 kg)

Power Take-off (PTO)

Clutch:dry disc
Rear PTO:independent
Engine RPM:540@1944, 1000@1916
Optional PTO:540/1000 (1.375) Optional
Rear PTO Type:540 (1.375)

Serial Number Location

Location:Serial number stamped into the rear of the tractor, above and to the left of the PTO shaft.