Tractorpedia.com

Massey Ferguson 263

Massey Ferguson 263 tractor
View Images
The Massey Ferguson 263 is a utility tractor produced from 1998 to 1999 as part of the 200 Three Series. Built in Coventry, England, it features a Perkins 2.7L 3-cylinder turbocharged diesel engine delivering 60 hp net power. The tractor offers two transmission options: an 8-speed sliding gear and an 8-speed synchro shuttle, both with dry disc clutches. It has two- or four-wheel drive with mechanical rear differential lock and power steering. The hydraulic system is open center with 11.4 gallons capacity and 2610 psi pressure. The tractor supports rear hitch type II/I with position and draft control and a live 540 RPM PTO. Dimensions vary slightly between 2WD and 4WD models, with weights ranging from 4915 to 5315 pounds. Optional front-end loaders include the Massey Ferguson 232 and 1032 models, compatible with 2WD and 4WD respectively.
Massey Ferguson 263tractorspecificationsPerkins 2.7L engineutility tractor8-speed transmissionhydraulic systemfront-end loader
Power60 hp
Founded1998 - 1999
Model263

Technical Specifications

Detailed specifications and technical data for Massey Ferguson 263

Power

Engine (net):60 hp (44.7 kW)
PTO (tested):53.0 hp (39.5 kW)
PTO (claimed):53 hp (39.5 kW)
Drawbar (tested):42.4 hp (31.6 kW)

Engine

Type:turbocharged diesel
Model:Perkins 903.27T
Torque:145 lb-ft (196.6 Nm)
Cooling:liquid-cooled
Cylinders:3-cylinder
Rated RPM:2250
Torque RPM:1400
Air cleaner:dual paper elements
Bore/Stroke:3.74x5.00 inches (95 x 127 mm)
Power (net):60 hp (44.7 kW)
Pre-heating:thermostart
Displacement:165 ci (2.7 L)
Oil capacity:7.2 qts (6.8 L)
Starter volts:12
Coolant capacity:10.8 qts (10.2 L)
Compression ratio:17.3:1

Capacity

Fuel:12.6 gal (47.7 L)
Hydraulic system:11.4 gal (43.1 L)

Electrical

Ground:negative
Battery CCA:420
Battery volts:12
Charging amps:45
Charging system:alternator

Hydraulics

Type:open center
Valves:2
Capacity:11.4 gal (43.1 L)
Pressure:2610 psi (180.0 bar)
Pump flow:9.5 gpm (36.0 lpm)
Optional pump flow:13.9 gpm (52.6 lpm)

Mechanical

ROPS:Two-post folding ROPS
Drive:Two- or four-wheel drive
Brakes:Independent mechanical wet disc brakes
Power steering:Yes
Differential lock:mechanical rear

Production

Type:Utility tractor
Series:200 Three Series
Built in:Coventry, England
Original price:$25,000 in 1999
Years produced:1998 - 1999

Attachments

Loader models:Massey Ferguson 232 loader, Massey Ferguson 1032 loader
Loader details:The model 232 loader was compatible with the Massey Ferguson 243 with two-wheel drive. The model 1032 loader was compatible with four-wheel drive.
232 Loader rollback:13°
1032 Loader rollback:20°
232 Loader dump time:1.9s
1032 Loader dump time:5.7s
232 Loader dump angle:42°
232 Loader lower time:2.3s
232 Loader raise time:3.5s
1032 Loader dump angle:38°
1032 Loader lower time:4.0s
1032 Loader raise time:5.8s
232 Loader bucket width:72 inches (182 cm)
1032 Loader bucket width:72 inches (182 cm)
232 Loader rollback time:1.2s
1032 Loader rollback time:4.3s
232 Loader reach (dumped):25 inches (63 cm)
232 Loader reach (ground):63 inches (160 cm)
1032 Loader reach (dumped):20 inches (50 cm)
1032 Loader reach (ground):69 inches (175 cm)
232 Loader height (at pin):106 inches (269 cm)
1032 Loader height (at pin):121 inches (307 cm)
232 Loader breakout (at pin):3000 lbs (1360 kg)
232 Loader clearance (dumped):80 inches (203 cm)
1032 Loader clearance (dumped):98 inches (248 cm)
1032 Loader lift (full at pin):3200 lbs (1451 kg)
232 Loader breakout (at 800mm):3400 lbs (1542 kg)
1032 Loader breakout (at 800mm):2500 lbs (1134 kg)
232 Loader lift (full at 800mm):2400 lbs (1088 kg)
1032 Loader lift (full at 800mm):2400 lbs (1088 kg)

Transmission

Options:8-speed sliding gear, 8-speed synchro shuttle
Sliding gear type:sliding gear
Sliding gear gears:8 forward and 2 reverse
Sliding gear clutch:dry disc
Synchro shuttle type:synchro shuttle
Synchro shuttle gears:8 forward and reverse
Synchro shuttle clutch:dry disc
Sliding gear description:Four gears (1-4) plus reverse (R) in two ranges (low/high)
Synchro shuttle description:Four gears (1-4) in two ranges (low/high) with synchronized shuttle shifting

Tractor hitch

Control:position and draft control
Rear Type:II/I
Rear lift (at ends):3500 lbs (1587 kg)
Rear lift (at 24"/610mm):2621 lbs (1188 kg)

Serial Numbers

Location:Serial number plate on the right side of the instrument panel.

Dimensions & Tires

Width:71.5 inches (181 cm)
2WD Length:132 inches (335 cm)
4WD Length:134 inches (340 cm)
Front tire:6.00-16
Weight 2WD:4915 lbs (2229 kg)
Weight 4WD:5315 lbs (2410 kg)
2WD Ag rear:18.4-16.1, 14.9-24, 14.9-28
2WD Ag front:9.00-10, 9.5L-15, 11L-15, 6.5-16
2WD Rear tire:13.6-28
2WD Wheelbase:77 inches (195 cm)
4WD Wheelbase:76 inches (193 cm)
Height (ROPS):74.5 inches (189 cm)
2WD Rear tread:56 to 84 inches (142 to 213 cm)
4WD Rear tread:56 to 72 inches (142 to 182 cm)
2WD Front tread:48 to 72 inches (121 to 182 cm)
4WD Front tread:51.4 to 63.6 inches (130 to 161 cm)
Ground clearance:13.5 inches (34 cm)
4WD Lawn/turf rear:14.9-24
4WD Lawn/turf front:10.5/80-18
Height (Folded ROPS):72.5 inches (184 cm)
Weight 4WD Operating:5110 lbs (2317 kg)
2WD Standard tires (ag):Front: 6.00-16. Rear: 13.6-28
4WD Standard tires (ag):Front: 260/80R-20. Rear: 14.9-28

Power Take-off (PTO)

Engine RPM:540@1789
2WD Rear PTO:live
4WD Rear PTO:independent
Rear PTO Type:540