Massey Ferguson

Massey Ferguson 8460

The Massey Ferguson 8460 is a row-crop tractor produced from 2004 to 2007 as part of the 8400 Series. Built in Germany, it features a powerful Sisu 7.4L 6-cylinder turbocharged intercooled diesel engine delivering 235 hp. The tractor offers advanced transmission options including a 42-speed power shift and a continuously variable transmission (DynaStep and Dyna-VT). It includes four-wheel drive, power steering, and independent hydraulic wet disc brakes with a standard air-conditioned cab. The hydraulics system is a closed center PFC with 2900 psi pressure and up to 39 gpm flow. The rear hitch is category III with a lift capacity of 14,400 lbs at 24 inches. PTO options include independent 540/1000 rpm with optional 540E/1000. Dimensions include a 121-inch wheelbase, 206-inch length, and operating weight near 19,910 lbs. The tractor supports front-end loader attachments such as the 1090 Loader with detailed lift and reach specifications.
Power235 hp
Founded2004 - 2007
Model8460

Technical Specifications

Detailed specifications and technical data for Massey Ferguson 8460

Power
Engine235 hp (175.2 kW)
PTO (tested)233.5 hp (174.1 kW)
PTO (claimed)200 hp (149.1 kW)
Drawbar (tested)175.3 hp (130.7 kW)
Engine
Typeturbocharged intercooled diesel
ModelSisu 7.4L 6-cyl diesel
Power235 hp (175.2 kW)
Coolingliquid-cooled
Cylinders6-cylinder
Fuel tank158.5 gal (599.9 L)
Rated RPM2200
Air cleanerdual paper elements
Bore/Stroke4.252x5.276 inches (108 x 134 mm)
Compression17.5:1
Displacement449.4 ci (7.4 L)
Starter volts12
Dimensions
Height122 inches (309 cm)
Length206 inches (523 cm)
Rear tire18.4R46
Wheelbase121 inches (307 cm)
Front tire16.9R30
Shipping weight19136 lbs (8680 kg)
Operating weight19910 lbs (9031 kg)
Hydraulics
Typeclosed center PFC
Valves4 or 5
Pressure2900 psi (200.0 bar)
Total flow39 gpm (147.6 lpm)
Mechanical
Cabstandard with air-conditioning
DriveFour-wheel drive
BrakesIndependent hydraulic wet disc brakes
Final drivesinboard planetary
Power steeringYes
Production
TypeRow-Crop tractor
Series8400 Series
Built inGermany
Years produced2004 - 2007
Attachments
front-end loader1090 Loader
1090 Loader rollback39°
1090 Loader dump angle47°
1090 Loader bucket width96 inches (243 cm)
1090 Loader reach dumped26 inches (66 cm)
1090 Loader reach ground103 inches (261 cm)
1090 Loader height at pin181 inches (459 cm)
1090 Loader breakout at pin8449 lbs (3832 kg)
1090 Loader breakout bucket6313 lbs (2863 kg)
1090 Loader clearance level173 inches (439 cm)
1090 Loader clearance dumped152 inches (386 cm)
1090 Loader lift 1.5m at pin7658 lbs (3473 kg)
1090 Loader lift full at pin6919 lbs (3138 kg)
1090 Loader lift full at 500mm4799 lbs (2176 kg)
Transmission
Type 1power shift
Type 2continuously variable transmission
Gears 142 forward and 36 reverse
Gears 2infinite forward and reverse
Notes 1The Dyna-Step transmission is mechanically the same as the CVT, but the operator shifts through set gears as with a power shift. There are 21 forward gear shifts in two ranges.
Transmission 1DynaStep
Transmission 2Dyna-VT
Transmission options42-speed power shift, continuously variable transmission
Tractor hitch
Rear TypeIII
Rear lift (at 24"/610mm)14,400 lbs (6531 kg)
Power Take-off (PTO)
Optional540E/1000
Rear PTOindependent
Rear PTO Type540/1000