New Holland TN60A
The New Holland TN60A is a utility tractor produced from 2004 to 2008 as part of the TN-A Series. Built in Jesi, Italy, it features a 2.9L Iveco 3-cylinder diesel engine delivering 55 hp net and 57 hp gross power. It offers multiple transmission options including 8-speed constant mesh and 16-speed Synchro Command Plus with power shuttle. The tractor supports two- or four-wheel drive, mechanical rear differential lock, hydrostatic power steering, and differential wet disc brakes. Hydraulics are open center with up to 16.9 gpm optional pump flow. The rear hitch is category II/I with a lift capacity of 3960 lbs at 24 inches. The PTO is independent with a 540 rpm type. Dimensions vary between 2WD and 4WD models with weights from 5180 to 6460 lbs ballasted. Electrical system includes a 12-volt battery and 65 amp alternator. Attachments include the 32LC loader with a 2600 lbs lift capacity and 53° dump angle. Variants include ROPS, cab, and SuperSteer models.
Power57 hp
Founded2004 - 2008
ModelTN60A
Technical Specifications
Detailed specifications and technical data for New Holland TN60A
Power
| Engine (net) | 55 hp (41.0 kW) |
|---|---|
| PTO (tested) | 48.3 hp (36.0 kW) |
| PTO (claimed) | 45 hp (33.6 kW) |
| Engine (gross) | 57 hp (42.5 kW) |
| Drawbar (tested) | 38.4 hp (28.6 kW) |
Engine
| Type | 2.9L 3-cyl diesel, liquid-cooled |
|---|---|
| Torque | 148 lb-ft (200.7 Nm) |
| Starter | electric |
| Fuel use | 3.00 gal/hour (11.4 l/hour) |
| Emissions | Tier 2 |
| Fuel tank | 23 gal (87.1 L) |
| Rated RPM | 2300 |
| Torque RPM | 1400 |
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.094x4.528 inches (104 x 115 mm) |
| Compression | 17:1 |
| Power (net) | 55 hp (41.0 kW) |
| Displacement | 179 ci (2.9 L) |
| Manufacturer | Iveco |
| Power (gross) | 57 hp (42.5 kW) |
| Starter volts | 12 |
Variants
| TN60A | ROPS |
|---|---|
| TN60DA | cab |
| TN60SA | SuperSteer |
| JX1060C | similar CaseIH model |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 730 |
| Battery volts | 12 |
| Charging amps | 65 |
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Valves | 1 to 4 |
| Pressure | 2755 psi (190.0 bar) |
| Pump flow | 12.4 gpm (46.9 lpm) |
| Steering flow | 7.2 gpm (27.3 lpm) |
| Optional pump flow | 16.9 gpm (64.0 lpm) |
| Steering flow with power shuttle | 9.2 gpm (34.8 lpm) |
Mechanical
| ROPS | ROPS. Canopy optional. |
|---|---|
| Drive | Two- or four-wheel drive |
| Brakes | Differential wet disc brakes |
| Steering | hydrostatic power |
| Differential lock | mechanical rear |
Production
| Type | Utility tractor |
|---|---|
| Series | TN-A Series |
| Built in | Jesi, Italy |
| Years produced | 2004 - 2008 |
Attachments
| Loader | 32LC Loader |
|---|---|
| Dump angle | 53° |
| Lift capacity | 2600 lbs lift (full at 800mm) (1179 kg) |
| Breakout force | 3900 lbs breakout (1769 kg) |
| Reach (dumped) | 38 inches (96 cm) |
| Rollback angle | 38° |
| Height (at pin) | 128 inches (325 cm) |
| Clearance (dumped) | 96 inches (243 cm) |
| Weight (without bucket) | 800 lbs (362 kg) |
Transmission
| 8-speed | Typeconstant mesh with mechanical shuttle Gears8 forward and reverse NotesLeft-hand mechanical shuttle required clutching. Clutch280mm dry cerametallic plate |
|---|---|
| Options | 8-speed constant mesh with mechanical shuttle; 12-speed partially synchronized with mechanical shuttle; 16-speed partially synchronized with mechanical shuttle; 16-speed partially synchronized with power shuttle |
| 12-speed | Typepartially synchronized with mechanical shuttle Gears12 forward and reverse NotesFour synchronized gears in three ranges. Left-hand mechanical shuttle requires clutching. Clutch280mm dry cerametallic plate TransmissionSynchro Command |
| 16-speed power shuttle | Typepartially synchronized with power shuttle Gears16 forward and reverse NotesClutchless left-hand power shuttle. Clutchsix 113mm wet organic discs TransmissionSynchro Command Plus |
| 16-speed mechanical shuttle | Typepartially synchronized with mechanical shuttle Gears16 forward and reverse NotesLeft-hand mechanical shuttle requires clutching. Clutch280mm dry cerametallic plate TransmissionSynchro Command Plus |
Tractor hitch
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 3960 lbs (1796 kg) |
Dimensions & Tires
| Width | 67.2 inches (170 cm) |
|---|---|
| Weight | 5180 to 5400 pounds |
| Rear tire | 14.9 |
| Wheelbase | 2WD, 78.9 4WD} 81.5 inches (207 cm) |
| 2WD Length | 153.3 inches (389 cm) |
| 2WD Weight | 5180 lbs (2349 kg) |
| 4WD Length | 151.6 inches (385 cm) |
| 4WD Weight | 5400 lbs (2449 kg) |
| Height (ROPS) | 95.1 inches (241 cm) |
| Front tire 2WD | 9.5x15 |
| Front tire 4WD | 11.2x20 |
| Ballasted Weight | 6460 lbs (2930 kg) |
| Height (Folded ROPS) | 75.1 inches (190 cm) |
Power Take-off (PTO)
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
