New Holland
New Holland TN75A
The New Holland TN75A is a utility tractor produced from 2004 to 2008 as part of the TN-A Series. It features a 75 hp Iveco 2.9L 3-cylinder turbocharged diesel engine with Tier 2 emissions, liquid cooling, and a 23-gallon fuel tank. Transmission options include 8, 12, and 16-speed partially synchronized gearboxes with mechanical or power shuttle. The tractor offers two- or four-wheel drive, mechanical rear differential lock, hydrostatic power steering, and differential wet disc brakes. Hydraulics are open center with up to 2755 psi pressure and pump flow of 16.9 gpm. The rear hitch is category II/I with a lift capacity of 3960 lbs at 24 inches. PTO is independent with a 540 rpm rear PTO shaft. Dimensions vary slightly between 2WD and 4WD models, with operating weights from 5020 to 5810 lbs. Electrical system includes a 12-volt battery and 65-amp alternator. Attachments include the 32LC front-end loader with a 2600 lbs lift capacity and 3900 lbs breakout force.
Power75 hp
Founded2004 - 2008
ModelTN75A
Technical Specifications
Detailed specifications and technical data for New Holland TN75A
Power
| Engine (net) | 72 hp (53.7 kW) |
|---|---|
| PTO (tested) | 64.4 hp (48.0 kW) |
| PTO (claimed) | 62 hp (46.2 kW) |
| Engine (gross) | 75 hp (55.9 kW) |
| Drawbar (tested) | 54.7 hp (40.8 kW) |
Engine
| Type | turbocharged diesel |
|---|---|
| Torque | 220 lb-ft (298.3 Nm) |
| Cooling | liquid-cooled |
| Starter | electric |
| Fuel use | 3.94 gal/hour (14.9 l/hour) |
| Cylinders | 3-cylinder |
| Emissions | Tier 2 |
| Fuel tank | 23 gal (87.1 L) |
| Rated RPM | 2300 |
| Torque RPM | 1400 |
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.094x4.528 inches (104 x 115 mm) |
| Compression | 16.5:1 |
| Power (net) | 72 hp (53.7 kW) |
| Displacement | 179 ci (2.9 L) |
| Manufacturer | Iveco |
| Power (gross) | 75 hp (55.9 kW) |
| Starter volts | 12 |
Weight
| Ballasted | 7,055 lbs (3200 kg) |
|---|---|
| 2WD Shipping | 5,020 lbs (2277 kg) |
| 4WD Shipping | 5,415 lbs (2456 kg) |
| 2WD Operating | 5,215 lbs (2365 kg) |
| 4WD Operating | 5,810 lbs (2635 kg) |
Variants
| TN75A | ROPS |
|---|---|
| TN75DA | cab |
| TN75FA | narrow/orchard |
| TN75SA | SuperSteer |
| JX1075C | similar CaseIH model |
Dimensions
| Width | 67.2 inches (170 cm) |
|---|---|
| 2WD Length | 153.3 inches (389 cm) |
| 4WD Length | 151.6 inches (385 cm) |
| 2WD Wheelbase | 81.5 inches (207 cm) |
| 4WD Wheelbase | 78.9 inches (200 cm) |
| Height (ROPS) | 95.1 inches (241 cm) |
| Height (Folded ROPS) | 75.1 inches (190 cm) |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 730 |
| Battery volts | 12 |
| Charging amps | 65 |
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Valves | 1 to 4 |
| Pressure | 2755 psi (190.0 bar) |
| Pump flow | 16.9 gpm (64.0 lpm) |
| Steering flow | 7.4 gpm (28.0 lpm) |
| Steering flow (with power shuttle) | 9.4 gpm (35.6 lpm) |
Mechanical
| ROPS | ROPS. Canopy optional |
|---|---|
| Drive | Two- or four-wheel drive |
| Brakes | Differential wet disc brakes |
| Steering | hydrostatic power |
| Differential lock | mechanical rear |
Production
| Years | 2004 - 2008 |
|---|---|
| Series | TN-A Series |
| Built in | Jesi, Italy |
| Category | Utility tractor |
Attachments
| Dump angle | 53° |
|---|---|
| Breakout force | 3900 lbs (1769 kg) |
| Reach (dumped) | 38 inches (96 cm) |
| Rollback angle | 38° |
| Height (at pin) | 128 inches (325 cm) |
| front-end loader | 32LC Loader |
| Clearance (dumped) | 96 inches (243 cm) |
| Weight (without bucket) | 800 lbs (362 kg) |
| Lift capacity (full at 800mm) | 2600 lbs (1179 kg) |
Transmission
| 8-speed | NoteLeft-hand synchronized mechanical shuttle requires clutching. Typeconstant mesh with mechanical shuttle Gears8 forward and reverse Clutch280mm dry cerametallic plate |
|---|---|
| Options | 8-speed constant mesh with mechanical shuttle; 12-speed partially synchronized with mechanical shuttle; 16-speed partially synchronized with mechanical shuttle; 16-speed partially synchronized with power shuttle |
| 12-speed | NoteFour synchronized gears with three ranges. Left-hand synchronized mechanical shuttle requires clutching. Typepartially synchronized with mechanical shuttle Gears12 forward and reverse Clutch280mm dry cerametallic plate TransmissionSynchro Command |
| 16-speed power shuttle | NoteLeft-hand clutchless power shuttle. Typepartially synchronized with power shuttle Gears16 forward and reverse Clutchsix 113mm wet organic discs TransmissionSynchro Command Plus |
| 16-speed mechanical shuttle | NoteLeft-hand synchronized mechanical shuttle requires clutching. Typepartially synchronized with mechanical shuttle Gears16 forward and reverse Clutch280mm dry cerametallic plate TransmissionSynchro Command Plus |
Tractor hitch
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 3960 lbs (1796 kg) |
Power Take-off (PTO)
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540 (1.375) |