Snapper lawn tractors
Snapper 25063
The Snapper 25063 is a riding lawn mower produced from 1979 to 1982 as part of Snapper's 3 Series. It features a 6 hp (4.5 kW) 1-cylinder air-cooled gasoline engine with a 1.75 gallon (6.6 L) fuel tank. The mower uses a 5-speed friction disc transmission with 5 forward and 1 reverse gear. It has two-wheel drive and manual steering with an open operator station. The power take-off (PTO) is a mid PTO, independent type with a manual clutch and pulley drive. Tires are sized 10.50x3.50-4 front and 16x4.80-8 rear. Attachments include a 25" mid-mount mower deck with a single blade and manual lift, and a 36" front-mount blade with manual lift and angle. Electrical system is 12 volts with negative ground. The mower was built in McDonough, Georgia, USA.
Power6 hp
Founded25" deck
Model25063
Technical Specifications
Detailed specifications and technical data for Snapper 25063
Engine
| Type | gasoline |
|---|---|
| Cooling | air-cooled vertical-shaft |
| Starter | manual recoil, electric Optional |
| Cylinders | 1-cylinder |
| Fuel tank | 1.75 gal (6.6 L) |
| Power (gross) | 6 hp (4.5 kW) |
| Starter volts | 12 |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Riding lawn mower |
|---|---|
| Series | 3 Series |
| Built in | McDonough, Georgia, USA |
| Years produced | 1979 - 1982 |
Attachments
| Blade | 36" front-mount, 36 inches width (91 cm), manual-lift, manual-angle |
|---|---|
| 25" mid-mount mower deck | 25 inches (63 cm) cutting width, mid-mount Snapper, 1-blade with manual lift, belt drive |
Transmission
| Type | friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Dimensions & Tires
| Rear tire | 16x4.80-8 |
|---|---|
| Front tire | 10.50x3.50-4 |
Power Take-off (PTO)
| Clutch | manual |
|---|---|
| PTO type | independent |
| Mid PTO Type | pulley |
| PTO location | Mid PTO |