Snapper lawn tractors
Snapper 25064
The Snapper 25064 is a riding lawn mower from the 4 Series produced between 1983 and 1984. It features a 6 hp (4.5 kW) 1-cylinder air-cooled gasoline engine with a 1.75 gallon (6.6 L) fuel tank. The transmission is a 5-speed friction disc with 5 forward and 1 reverse gear. It has two-wheel drive and manual steering with an open operator station. The mower includes a mid PTO with an independent pulley type and manual clutch. Tires are sized 10.5x3.5-4 front and 16x4.80-8 rear. Attachments include a 25" mid-mount mower deck with a single blade and a 36" front-mount blade, both manually lifted and angled. Electrical system uses a 12-volt battery with negative ground. The Snapper 25064 was built in McDonough, Georgia, USA.
Power6 hp
Founded25" deck
Model25064
Technical Specifications
Detailed specifications and technical data for Snapper 25064
Engine
| Type | gasoline |
|---|---|
| Cooling | air-cooled vertical-shaft |
| Starter | manual recoil, electric Optional |
| Cylinders | 1-cylinder |
| Fuel tank | 1.75 gal (6.6 L) |
| Power (gross) | 6 hp (4.5 kW) |
| Starter volts | 12 |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Riding lawn mower |
|---|---|
| Series | 4 Series |
| Built in | McDonough, Georgia, USA |
| Years produced | 1983 - 1984 |
Attachments
| Blade | 36" front-mount, 36 inches width (91 cm), manual-lift, manual-angle |
|---|---|
| 25" mid-mount mower deck | Type: mid-mount Snapper, 1-blade with manual lift, Cutting width: 25 inches (63 cm), Drive: belt |
Transmission
| Type | friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Dimensions & Tires
| Rear tire | 16x4.80-8 |
|---|---|
| Front tire | 10.5x3.5-4 |
Power Take-off (PTO)
| Clutch | manual |
|---|---|
| PTO type | independent |
| Mid PTO Type | pulley |
| PTO location | Mid PTO |