Steiger

Steiger Panther III PTA-297

The Steiger Panther III PTA-297 is a four-wheel drive (4WD) tractor produced by Steiger from 1978 to 1981 as part of the III Series. It features a turbocharged Cummins VT-903 14.8L 8-cylinder diesel engine producing 295 hp (220 kW). The tractor is equipped with an Allison HT-740 8-speed power shift transmission with torque converter and articulated power steering. It has a Safari Cab with air-conditioning as standard. The Panther III PTA-297 has a wheelbase of 132.5 inches, weighs 28,975 lbs, and offers a fuel capacity of 225 gallons. It includes an independent rear PTO with 540 and 1000 RPM options and a hydraulic system with 4 valves and 35 gpm pump flow. The tractor was originally priced at $95,200 in 1982 and was built in Fargo, North Dakota, USA.
Power295 hp
Founded1978 - 1981
ModelPTA-297

Technical Specifications

Detailed specifications and technical data for Steiger Panther III PTA-297

Power
Engine295 hp (220.0 kW)
PTO (claimed)105 hp 1000 RPM (78.3 kW), 57 hp 540 RPM (42.5 kW)
Engine
Typeturbocharged diesel
ModelCummins VT-903
Power295 hp (220.0 kW)
Torque700 lb-ft (949.2 Nm)
Idle RPM650-2860
Cylinders8-cylinder
Rated RPM2600
Torque RPM1800
Bore/Stroke5.50x4.75 inches (140 x 121 mm)
Pre-heatingether injection (Optional), block heater (Optional)
Displacement903 ci (14.8 L)
Oil capacity38 qts (36.0 L)
Configurationliquid-cooled 90-degree V8
Starter volts12
Coolant capacity68 qts (64.4 L)
Height
Cab134.9 inches (342 cm)
Hood94.7 inches (240 cm)
Exhaust155.7 inches (395 cm)
Capacity
Fuel225 gal (851.6 L)
Hydraulic system22 gal (83.3 L)
Variants
PTA-296naturally aspirated
PTA-297turbocharged
Electrical
Batteries4
Battery CCA475
Battery volts12
Charging amps90
Charging systemDelco-Remy alternator
Hydraulics
Typeopen center load sensing
Valves4
Capacity22 gal (83.3 L)
Pump flow35 gpm (132.5 lpm)
Total flow2250 gpm (8516.2 lpm)
Mechanical
CabSafari Cab standard with air-conditioning
DriveFour-wheel drive
SteeringArticulated power steering
Final drivesSteiger S-34 outboard planetary
Production
SeriesIII Series
Built inFargo, North Dakota, USA
Drive typeFour-wheel Drive (4WD) tractor
Years made1978 - 1981
Original price$95,200 in 1982
Transmission
Typepower shift with torque converter
Gears8 forward and 2 reverse
ModelAllison HT-740
DetailsFour gears, plus reverse, with two-speed transfer case. Automatic torque converter lock-up.
Tractor hitch
Rear TypeIII Optional
Dimensions & Tires
Width39 inches Frame (99 cm), 95.7 inches Fenders (243 cm), 140.3 inches Outer width of duals (356 cm)
Length264.6 inches (672 cm)
Rear tire24.5-32, 30.5-32, 20.8-38
Wheelbase132.5 inches (336 cm)
Front tire24.5-32, 30.5-32, 20.8-38
Max weight34000 lbs (15422 kg)
Shipping weight28975 lbs (13143 kg)
Power Take-off (PTO)
ClutchElectrically-controlled hydraulic PTO drive.
Rear PTOindependent
Rear PTO Type540 (1.375), 1000 (1.75)