Wheel Horse lawn tractors

Wheel Horse C-175

The Wheel Horse C-175 is a garden tractor produced from 1980 to 1984 by Wheel Horse in South Bend, Indiana, USA. It features a 17 hp Kohler KT17 691cc 2-cylinder air-cooled gasoline engine, with a fuel tank capacity of 3 gallons. Transmission options include a 6-speed gear and a hydrostatic Eaton 1100 with infinite forward and reverse speeds. The tractor has a wheelbase of 45.5 inches, weighs between 570 to 600 pounds depending on transmission, and rides on 16x6.50-8 front and 23x9.50-12 rear lawn/turf tires. Electrical system includes a 12-volt battery with a 15 amp alternator. The C-175 offers a mid PTO with manual clutch and pulley type. Attachments available include 42" and 48" mid-mount mower decks, snowblower, blade, and a front-end loader with a 350 lbs lift capacity. Controls include brake, forward/reverse, throttle, and parking brake.
Power-
Founded-
ModelC-175

Technical Specifications

Detailed specifications and technical data for Wheel Horse C-175

Engine
Typegasoline
ModelKohler KT17
Coolingair-cooled horizontal-shaft opposed-twin
Starterelectric
Cylinders2-cylinder
Fuel tank3 gal (11.4 L)
Point gap0.020 inches (0.508 mm)
SparkplugBL-15Y
Air cleanerdry element
Bore/Stroke3.125x2.75 inches (79 x 70 mm)
Displacement691 cc (42.18 ci)
Oil capacity1.75 qts (1.7 L)
Power (gross)17 hp (12.7 kW)
Sparkplug gap0.025 inches (0.635 mm)
Starter volts12
Oil change interval25 h
Dimensions
Width37 inches (93 cm)
Height41 inches (104 cm)
Length69 inches (175 cm)
Rear tire23x9.50-12
Wheelbase45.5 inches (115 cm)
Front tire16x6.50-8
Gear Shipping weight570 lbs (258 kg)
Hydro Shipping weight600 lbs (272 kg)
Electrical
Groundnegative
Battery AH32
Battery volts12
Charging amps15
Charging systemalternator
Production
TypeGarden tractor
SeriesC Series
Built inSouth Bend, Indiana, USA
Years produced1980 - 1984
Attachments
Blade48 inches width (121 cm), front-mount
Snowblower42 inches width (106 cm), front-mount
Front-end loaderKick-Way 45-08210 Loader, 350 lbs lift (full at pin) (158 kg), 47° dump, 20 inches reach (dumped) (50 cm), 43 inches reach (ground) (109 cm), 12° rollback, 76 inches height (at pin) (193 cm), 55 inches clearance (dumped) (139 cm), weight: 450 lbs (204 kg) without bucket, Bucket width: 40 inches (101 cm)
42" mid-mount mower deck42 inches (106 cm), 3-blade, right-discharge
48" mid-mount mower deck48 inches (121 cm), 3-blade, right-discharge
Transmission
NotesThe Eaton hydrostatic was used through the production run of the C-175. A Sundstrand 90 hydrostatic was also used during the 1980 production year, identified by tractor model code 01-17KS02.
Options6-speed gear, hydrostatic
ControlsBrake, Forward/reverse, Throttle, Parking brake
ManufacturerWheel Horse
Hydrostatic typebelt-driven hydrostatic
Hydrostatic gearsinfinite forward and reverse
Gear transmission typebelt-driven gear
Gear transmission gears6 forward and 2 reverse
Hydrostatic oil capacity5 qts (4.7 L)
Hydrostatic transmissionEaton 1100
Gear transmission oil capacity2 qts (1.9 L)
Power Take-off (PTO)
TypeMid PTO
Clutchmanual
Mid PTO Typepulley
PTO operationindependent