Wheel Horse lawn tractors

Wheel Horse D-200

The Wheel Horse D-200 is a garden tractor produced from 1974 to 1981 as part of the D Series. It features a 19.9 hp Kohler K532S 879cc 2-cylinder gasoline engine, hydrostatic transmission, and two-wheel drive with manual steering. The tractor has an open operator station and was built in South Bend, Indiana, USA. It supports various attachments including mower decks, snowblower, blade, front-end loader, and backhoe. The D-200 was offered at original prices ranging from $3,295 to $3,880 during the mid to late 1970s.

Power-

Founded-

ModelD-200

View Images

Technical Specifications

Detailed specifications and technical data for Wheel Horse D-200

Engine

Type	gasoline, 2-cylinder, air-cooled horizontal-shaft horizontally-opposed
Model	Kohler K532S
Starter	electric
Fuel tank	8 gal (30.3 L)
Point gap	0.020 inches (0.508 mm)
Bore/Stroke	3.38x3.00 inches (86 x 76 mm)
Displacement	879 cc (53.68 ci)
Oil capacity	3.5 qts (3.3 L)
Power (gross)	19.9 hp (14.8 kW)
Sparkplug gap	0.035 inches (0.889 mm)
Starter volts	12

Dimensions

Width	45 inches (114 cm)
Height	45.5 inches (115 cm)
Length	75.5 inches (191 cm)
Weight	1150 lbs (521 kg)
Rear tire	27x12.00-12
Wheelbase	50 inches (127 cm)
Front tire	18x8.50-8
Ag rear tire	26x12.00-12, 27x12.00-12
Lawn/turf rear tire	27x12.00-12
Lawn/turf front tire	18x8.50-8

Electrical

Ground	negative
Battery volts	12
Charging amps	15

Mechanical

Drive	Two-wheel drive
Steering	Manual steering
Operator station	Open operator station

Production

Series	D Series
Built in	South Bend, Indiana, USA
Category	Garden tractor
Years made	1974 - 1981
Original price	$3,420 (1975), $3,295 (1976), $3,445 (1977), $3,880 (1978)

Attachments

Notes	The 60-inch rear mower was mounted on the three-point hitch used the rear PTO. A rear PTO-driven 50-inch tiller, model 7-1261, was available. In late 1977, Wheel Horse removed the Ark 550 loader and Brantly 617A backhoe from their list of approved attachments for the D-200 due to high axle failure rates and warranty claims.
56" Blade	Wheel Horse 6-1142, front-mount, 56 inches width (142 cm), 21 inches height (53 cm), angling 30°, 140 lbs (63 kg), hydraulic-lift, manual-angle
Ark 550 Loader	500 lbs lift (full at pin) (226 kg), 45° dump, 24 inches reach (dumped) (60 cm), 83 inches height (at pin) (210 cm), 66 inches clearance (dumped) (167 cm), bucket width 40 inches (101 cm) and 48 inches (121 cm)
48" Snow blower	Wheel Horse 6-7452, 48 inches width (121 cm), single-stage, clear height 16 inches (40 cm), front-mount, hydraulic-lift, 225 lbs (102 kg)
Brantly 617A Backhoe	Backhoe type Brantly 617A Backhoe, weight 775 lbs (351 kg), transport height 72 inches (182 cm), bucket width 8 inches (20 cm), 13 inches (33 cm), 16 inches (40 cm), 2-Foot flat digging depth 72 inches (182 cm), reach from pivot 108 inches (274 cm), swing arc 135°, bucket force 3000 lbs (1360 kg), dipperstick force 1560 lbs (707 kg)
48" mid-mount mower deck	Wheel Horse 5-1221, 48 inches (121 cm), total width 61 inches (154 cm), 3-blade, hydraulic lift, right-discharge, cut height 1.5 to 3.5 inch (3 to 8 cm), 150 lbs (68 kg)
60" rear-mount mower deck	Wheel Horse 5-0901, 60 inches (152 cm), total width 67 inches (170 cm), rear-mount, 3-blade, hydraulic lift, rear-discharge, cut height 1 to 6 inch (2 to 15 cm), 350 lbs (158 kg)