Wheel Horse LT-832 Work Horse
The Wheel Horse LT-832 Work Horse is a lawn tractor produced from 1982 to 1983 as part of the Work Horse LT Series. It features an 8 hp Briggs & Stratton 318cc 1-cylinder gasoline engine, a Peerless 601-001 belt-driven 3-speed transmission with 3 forward and 1 reverse gear, and two-wheel drive with manual steering. The tractor has an open operator station and an independent front PTO with a manual clutch. Dimensions include a 45.5 inch wheelbase, 66 inch length, 36.5 inch height, and a weight of 388 lbs. Tires are sized 13x5.00-6 front and 18x6.50-8 rear. Attachments available include a 32" mid-mount mower deck, a 37" snowblower, and a 42" blade, all Wheel Horse branded and front or mid-mounted. Electrical system features a negative ground, alternator charging system with 3 amps, 12 volt battery, and 24 AH capacity. The LT-832 was built in South Bend, Indiana, USA.
Power-
Founded-
ModelLT-832
Technical Specifications
Detailed specifications and technical data for Wheel Horse LT-832 Work Horse
Tires
| Rear tire | 18x6.50-8 |
|---|---|
| Front tire | 13x5.00-6 |
Engine
| Type | gasoline |
|---|---|
| Model | Briggs & Stratton 191707 |
| Cooling | air-cooled vertical-shaft |
| Cylinders | 1-cylinder |
| Fuel tank | 1.5 gal (5.7 L) |
| Point gap | 0.020 inches (0.508 mm) |
| Rated RPM | 3600 |
| Bore/Stroke | 3.00x2.75 inches (76 x 70 mm) |
| Displacement | 318 cc (19.44 ci) |
| Oil capacity | 1.125 qts (1.1 L) |
| Power (gross) | 8 hp (6.0 kW) |
| Sparkplug gap | 0.030 inches (0.762 mm) |
| Starter volts | 12 |
Dimensions
| Height | 36.5 inches (92 cm) |
|---|---|
| Length | 66 inches (167 cm) |
| Weight | 388 lbs (175 kg) |
| Wheelbase | 45.5 inches (115 cm) |
Electrical
| Ground | negative |
|---|---|
| Battery AH | 24 |
| Battery volts | 12 |
| Charging amps | 3 |
| Charging system | alternator |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | manual |
| Operator station | Open operator station |
Production
| Series | Work Horse LT Series |
|---|---|
| Category | Lawn tractor |
| Years produced | 1982 - 1983 |
| Manufactured in | South Bend, Indiana, USA |
Attachments
| Blade | 42 inches (106 cm) width, front-mount Wheel Horse |
|---|---|
| Snowblower | 37 inches (93 cm) width, front-mount Wheel Horse |
| 32" mid-mount mower deck | 32 inches (81 cm) cutting width, 2-blade with manual lift, mid-mount Wheel Horse |
Transmission
| Type | belt-driven gear |
|---|---|
| Gears | 3 forward and 1 reverse |
| Model | Peerless 601-001 |
Power Take-off (PTO)
| Clutch | manual |
|---|---|
| Front PTO | independent |
