Allis Chalmers

Allis Chalmers FD5

The Allis Chalmers FD5 is a farm tractor produced from 1963 to 1964 by Allis Chalmers in Vendeuvre, France. It features a Vendeuvre 4.0L 3-cylinder air-cooled diesel engine producing 50 hp (37.3 kW) at 1800 RPM. The tractor has an 8-speed transmission with 8 forward and 4 reverse gears, and a two-wheel drive mechanical system with an open operator station. It has a wheelbase of 89.8 inches (228 cm), weighs 5,412 lbs (2454 kg), and uses 5.50x20 front and 12x38 rear agricultural tires. The FD5 includes a rear Type II hitch, a 540 RPM rear PTO, and a belt pulley with 11 inch diameter running at 1280 RPM. Fuel capacity is 18.5 gallons (70.0 L) and hydraulic system capacity is 4.75 gallons (18.0 L). Electrical system uses 2 six-volt batteries with negative ground.
Power50 hp
Founded1963 - 1964
ModelFD5

Technical Specifications

Detailed specifications and technical data for Allis Chalmers FD5

Power
Engine50 hp (37.3 kW)
Tires
Ag rear12x38
Ag front5.50x20
Engine
Typediesel
ModelVendeuvre Type 66
Power50 hp (37.3 kW)
Coolingair-cooled
Cylinders3-cylinder
Rated RPM1800
Bore/Stroke4.528x5.118 inches (115 x 130 mm)
Displacement247.1 ci (4.0 L)
Oil capacity14.8 qts (14.0 L)
Starter volts12
Capacity
Fuel18.5 gal (70.0 L)
Hydraulic system4.75 gal (18.0 L)
Dimensions
Width68.9 inches (175 cm)
Height63 inches (160 cm)
Length129.9 inches (329 cm)
Weight5,412 lbs (2454 kg)
Wheelbase89.8 inches (228 cm)
Ground clearance19.3 inches (49 cm)
Electrical
Groundnegative
Batteries2
Battery volts6
Hydraulics
Capacity4.75 gal (18.0 L)
Mechanical
DriveTwo-wheel drive
Operator stationOpen operator station.
Production
Built inVendeuvre, France
ManufacturerAllis Chalmers
Years produced1963 - 1964
Belt Pulley
RPM1280
Width7.5 inches (19 cm)
Diameter11 inches (27 cm)
Transmission
Gears8 forward and 4 reverse
DescriptionFour speeds (1-4) in two ranges.
Oil capacity26.4 qts (25.0 L)
Tractor hitch
Rear TypeII
Power Take-off (PTO)
Engine RPM540@1080
Rear PTO Type540 (1.375)