Allis Chalmers UC
The Allis Chalmers UC is a row-crop tractor produced from 1933 to 1941 by Allis Chalmers in West Allis, Wisconsin, USA. Originally named the All-Crop, the UC was built in two main variants: the standard U and the row-crop UC. It features two engine options: a 4.9L 4-cylinder gasoline engine and a 5.2L 4-cylinder gasoline engine, with power ratings around 34.4 hp estimated. The tractor has a 3-speed or 4-speed non-synchronized gear transmission, two-wheel drive, and an open operator station. It has a wheelbase of 87 inches, weighs approximately 5815 lbs, and can pull 3 plows. The UC was built in total numbers of 4,647 units, with an additional 1,541 UC Cane units produced.
Power34 hp[B]
Founded1933 - 1941
ModelUC
Technical Specifications
Detailed specifications and technical data for Allis Chalmers UC
Power
| Plows | 3 |
|---|---|
| Belt (tested) | 34.09 hp (25.4 kW) |
| Belt (claimed) | 31 hp (23.1 kW) |
| Drawbar (tested) | 21.14 hp (15.8 kW) |
| Drawbar (claimed) | 19 hp (14.2 kW) |
Tires
| Ag rear | 42x2 steel, 12.75x24 |
|---|---|
| Ag front | 24x5 steel, 6.00x16 |
Engine
| Aux. fuel | 1 gal (3.8 L) |
|---|---|
| Fuel tank | 24 gal (90.8 L) |
| Details 4.9L | Allis-Chalmers gasoline 4-cylinder vertical I-head, Displacement 300.7 ci (4.9 L), Bore/Stroke 4.375x5.00 inches (111 x 127 mm), Rated RPM 1200, The 301 Allis engine replaced was the second engine on the All-Crop / UC. It was used from 1933 until 1936; tractor serial numbers UC1369 though UC2281 |
| Details 5.2L | Allis-Chalmers gasoline 4-cylinder liquid-cooled vertical I-head, Displacement 318 ci (5.2 L), Bore/Stroke 4.50x5.00 inches (114 x 127 mm), Rated RPM 1200, Coolant capacity 24 qts (22.7 L), The 318 Allis was the final engine, introduced in 1936 on tractor serial number UC2282 |
| Engine options | Allis-Chalmers 4.9L 4-cyl gasoline, Allis-Chalmers 5.2L 4-cyl gasoline |
Variants
| U | standard |
|---|---|
| UC | row-crop |
Dimensions
| Width | 81 inches (205 cm) |
|---|---|
| Height | 69.5 inches (176 cm) |
| Length | 145 inches (368 cm) |
| Weight | 5815 lbs (2637 kg) |
| Wheelbase | 87 inches (220 cm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Operator station | Open operator station. |
Production
| Note | The Allis-Chalmers model UC was originally named the All-Crop. |
|---|---|
| Type | Row-Crop tractor |
| Built in | West Allis, Wisconsin, USA |
| Total built | 4,647 UC, 1,541 UC Cane |
| Years produced | 1933 - 1941 |
Belt Pulley
| RPM | 1095 |
|---|---|
| Speed | 2870 ft/min (874.78 meters/min) |
| Width | 7.5 inches (19 cm) |
| Diameter | 10 inches (25 cm) |
Transmission
| Type 3-speed | non-synchronized gear |
|---|---|
| Type 4-speed | non-synchronized gear |
| Gears 3-speed | 3 forward and 1 reverse |
| Gears 4-speed | 4 forward and 1 reverse |
| Transmission options | 3-speed non-synchronized gear, 4-speed non-synchronized gear |
Serial Numbers
| 1930 | UC1 |
|---|---|
| 1931 | UC39 |
| 1932 | UC1100 |
| 1933 | UC1232 |
| 1934 | UC1294 |
| 1935 | UC1552 |
| 1936 | UC2001 |
| 1937 | UC2771 |
| 1938 | UC3757 |
| 1939 | UC4547 |
| 1940 | UC4770 |
| 1941 | UC4972 |
| 1944 | 5038 |
| 1945 | - |
| 1946 | - |
| 1947 | 5068 |
| 1948 | 5268 |
| 1949 | 5526 |
| 1950 | 5644 |
| 1951 | 5806 |
| 1952 | 5939 |
| 1953 | 6143 |
| Location | Rear axle near PTO |
Related Models
More Allis Chalmers models
View all Allis Chalmers modelsAllis Chalmers 10-18Model10-18
Allis Chalmers 160Model160
Allis Chalmers 170Model170
Allis Chalmers 175Model175
Allis Chalmers 18-30Model18-30
Allis Chalmers 180Model180
Allis Chalmers 185Model185
Allis Chalmers 190Model190
Allis Chalmers 190XTModel190XT
Allis Chalmers 20-35Model20-35
Allis Chalmers 200Model200
Allis Chalmers 210Model210
