ATC

ATC Terratrac 300

The ATC Terratrac 300 is an agricultural crawler tractor produced by ATC in Churubusco, Indiana, USA from 1954 to 1955. It features a Continental 2.3L 4-cylinder gasoline engine producing 36.5 hp (27.2 kW) gross power. The tractor uses a 3-speed gear transmission with 3 forward and 1 reverse gears and a dry disc clutch. It has a crawler drive with spur gear final drives and contracting band brakes. The open operator station provides good visibility. Hydraulics are open center type with a pump flow of 11 gpm (41.6 lpm). The tractor weighs between 4830 lbs (2190 kg) and 7160 lbs (3247 kg) depending on attachments. It has 11-inch wide tracks with a length on ground of 54 inches (137 cm). Dimensions include a length of 92 inches (233 cm), height of 63.5 inches (161 cm), and ground clearance of 16 inches (40 cm). Attachments include blades and front-end loaders with various specifications. The model is part of a series including the ATC 200, 300, 356, and 400.
Power36 hp
Founded1954 - 1955
Model300

Technical Specifications

Detailed specifications and technical data for ATC Terratrac 300

Power
Plows3 * 14-inch
Engine (gross)36.5 hp (27.2 kW)
Engine
Typegasoline
ModelContinental F-140
Torque106.5 lb-ft (144.4 Nm)
Coolingliquid-cooled
Cylinders4-cylinder
Rated RPM1850
Bore/Stroke3.1875x4.375 inches (81 x 111 mm)
Displacement140 ci (2.3 L)
Starter typeelectric
Power (gross)36.5 hp (27.2 kW)
Tracks
Width11 inches (27 cm)
Area on ground1188 in² (0.8 m²)
Length on ground54 inches (137 cm)
Weight
Dozer5450 lbs (2472 kg)
Loader7160 lbs (3247 kg)
Tractor4830 lbs (2190 kg)
Dimensions
Height63.5 inches (161 cm)
Length92 inches (233 cm)
Ground clearance16 inches (40 cm)
Hydraulics
Typeopen center
Pump flow11 gpm (41.6 lpm)
Mechanical
Drivecrawler
BrakesContracting band brakes
Final drivesspur gear
Operator stationOpen operator station
Production
TypeAgricultural Crawler tractor
Built inChurubusco, Indiana, USA
ManufacturerATC
Years produced1954 - 1955
Attachments
OverviewBlade, Front-end loader
72" BladeATC Bulldozer, front-mount, 72 inches width (182 cm), 25.5 inches height (64 cm), 22 inches lift (55 cm), 11 inches cut (27 cm), hydraulic-lift
88" BladeATC Angledozer, front-mount, 88 inches width (223 cm), 23 inches height (58 cm), 21 inches lift (53 cm), Angling 25°, 9 inches cut (22 cm), hydraulic-lift, hydraulic-angle
300 Terraloader Loader56° dump, 12° rollback (ground line), 34° rollback (raised), 101.5 inches height (at pin) (257 cm), Bucket width: 61 inches (154 cm)
Belt Pulley
RPM664
Speed1043 ft/min (317.91 meters/min)
Width7 inches (17 cm)
Diameter6 inches (15 cm)
Transmission
Typegear
Gears3 forward and 1 reverse
Clutchdry disc