ATC

ATC Terratrac 500

The ATC Terratrac 500 is an agricultural crawler tractor produced from 1954 to 1957 by ATC in Churubusco, Indiana, USA. It features a crawler drive with an open operator station and is powered by either a Continental 2.7L 4-cylinder gasoline engine or a Continental 2.6L 4-cylinder diesel engine. The tractor has a 3-speed gear transmission with 3 forward and 1 reverse gears. It includes an open center hydraulic system with 1000 psi pressure and 11 gpm pump flow. The Terratrac 500 runs on 13-inch wide tracks and weighs between 6335 and 8440 pounds depending on configuration. Attachments include blades and a front-end loader, with detailed specifications for the 72" and 88" blades and the 500 Terraloader loader.
Power-
Founded-
ModelTerratrac 500

Technical Specifications

Detailed specifications and technical data for ATC Terratrac 500

Power
Engine (gross)42.5 hp (31.7 kW)
Engine
Fuel tank18 gal (68.1 L)
Diesel torque110 lb-ft (149.2 Nm)
Diesel starterelectric
Engine optionsContinental 2.7L 4-cyl gasoline, Continental 2.6L 4-cyl diesel
Gasoline torque124.3 lb-ft (168.6 Nm)
Diesel rated RPM1850
Gasoline starterelectric
Diesel torque RPM1200
Diesel bore/stroke3.375x4.375 inches (86 x 111 mm)
Diesel engine typediesel, 4-cylinder, liquid-cooled
Gasoline rated RPM1850
Diesel displacement157 ci (2.6 L)
Diesel engine modelContinental GD-157
Diesel oil capacity8 qts (7.6 L)
Gasoline torque RPM2000
Diesel power (gross)38 hp (28.3 kW)
Diesel starter volts12
Gasoline bore/stroke3.44x4.375 inches (87 x 111 mm)
Gasoline engine typegasoline, 4-cylinder, liquid-cooled
Gasoline displacement162 ci (2.7 L)
Gasoline engine modelContinental FA-162
Gasoline oil capacity8 qts (7.6 L)
Gasoline power (gross)42.5 hp (31.7 kW)
Gasoline starter volts6
Diesel coolant capacity14 qts (13.2 L)
Gasoline coolant capacity14 qts (13.2 L)
Tracks
Width13 inches (33 cm)
Area on ground1482 in² (1.0 m²)
Length on ground57 inches (144 cm)
Dimensions
Weight6335 to 8440 pounds
Weight (dozer)6335 lbs (2873 kg)
Weight (loader)8440 lbs (3828 kg)
Hydraulics
Typeopen center
Pressure1000 psi (69.0 bar)
Pump flow11 gpm (41.6 lpm)
Mechanical
Drivecrawler
Operator stationOpen operator station
Production
TypeAgricultural Crawler tractor
Built inChurubusco, Indiana, USA
ManufacturerATC
Years produced1954 - 1957
Attachments
Blade72" Blade (ATC Bulldozer, front-mount, 72 inches width (182 cm), 27.5 inches height (69 cm), 25 inches lift (63 cm), 12 inches cut (30 cm), hydraulic-lift), 88" Blade (ATC Angledozer, front-mount, 88 inches width (223 cm), 27.5 inches height (69 cm), 25 inches lift (63 cm), 6 inches tilt (15 cm), Angling 25°, 12 inches cut (30 cm), hydraulic-lift, hydraulic-angle)
Front-end loader500 Terraloader Loader (56° dump, 12° rollback (ground line), 34° rollback (raised), 125 inches height (at pin) (317 cm), Bucket width: 61 inches (154 cm))
Transmission
Typegear
Gears3 forward and 1 reverse