Challenger
Challenger MT675E
The Challenger MT675E is a row-crop tractor produced from 2014 to 2020 as part of the MT600E Series. Manufactured by Challenger, a part of AGCO, it is built in Jackson, Minnesota, USA. It features an AGCO POWER 8.4L 6-cylinder turbocharged diesel engine with air-to-air intercooler, delivering 320 hp rated power and up to 350 hp maximum power. The tractor uses a Techstar continuously variable transmission (CVT) with infinite forward and reverse gears. It includes four-wheel drive, electro-hydraulic differential lock, hydrostatic power steering, and hydraulic wet disc brakes. The cab is standard with air-conditioning and optional hydraulic cab suspension. Hydraulics are closed center load sensing with 2900 psi pressure and 54 gpm pump flow. The rear hitch is category III/IVN with a lift capacity of 26455 lbs. The rear PTO is independent with 1000/1000E type. Dimensions include a 122 inch wheelbase, 218.6 inch length, 141 inch cab height, and shipping weight of 23810 lbs. Electrical system is 12 volts with a 240 amp alternator. Similar Massey Ferguson model is 8735.
Power320 hp
Founded2014 - 2020
ModelMT675E
Technical Specifications
Detailed specifications and technical data for Challenger MT675E
Power
| Engine power | 320 hp (238.6 kW) |
|---|---|
| PTO (tested) | 314.3 hp (234.4 kW) |
| PTO (claimed) | 275 hp (205.1 kW) |
| Drawbar (tested) | 258.1 hp (192.5 kW) |
Engine
| Type | turbocharged with air-to-air intercooler diesel |
|---|---|
| Power | 320 hp (238.6 kW) |
| Cooling | liquid-cooled |
| Starter | electric |
| Cylinders | 6-cylinder 24-valve |
| Emissions | Tier IV |
| Fuel tank | 166 gal (628.3 L) |
| Rated RPM | 2100 |
| Bore/Stroke | 4.37x5.71 inches (111 x 145 mm) |
| Displacement | 512.6 ci (8.4 L) |
| Manufacturer | AGCO POWER |
| Maximum Power | 350 hp (261.0 kW) |
| Starter volts | 12 |
| Emission control | selective catalytic reduction (SCR) |
| Exhaust fluid (DEF) | 15.8 gal (59.8 L) |
Variants
| Similar model | 8735 Massey Ferguson |
|---|
Dimensions
| Length | 218.6 inches (555 cm) |
|---|---|
| Wheelbase | 122 inches (309 cm) |
| Height (cab) | 141 inches (358 cm) |
| Bar rear axle | 4.33 by 105 inches (109 by 2667 mm), 4.33 by 118 inches (109 by 2997 mm) |
| Shipping weight | 23810 lbs (10800 kg) |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
| Charging amps | 240 (twin 120A) |
| Charging volts | 12 |
| Charging system | alternator |
Hydraulics
| Type | closed center load sensing (CCLS) |
|---|---|
| Valves | 4 to 6 |
| Pressure | 2900 psi (200.0 bar) |
| Pump flow | 54 gpm (204.4 lpm) |
Mechanical
| Cab | standard with air-conditioning. Optional OptiRide Plus hydraulic cab suspension. AgCommand ready; AUTO-GUIDE 3000 |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Steering | hydrostatic power |
| Four-wheel drive | yes |
| Differential lock | electro-hydraulic |
Production
| Type | Row-Crop tractor |
|---|---|
| Series | MT600E Series |
| Built in | Jackson, Minnesota, USA |
| Years produced | 2014 - 2020 |
Transmission
| Type | continuously variable transmission (CVT) |
|---|---|
| Gears | infinite forward and reverse (2-range) |
| Transmission | Techstar CVT |
Tractor hitch
| Drawbar | Cat. 3 |
|---|---|
| Rear Type | III/IVN |
| Optional drawbars | Cat 3 Heavy Duty, Cat 4 |
| Rear lift (at ends) | 26455 lbs (11999 kg) |
Power Take-off (PTO)
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 1000/1000E (1.75) |