Cockshutt
Cockshutt 1950-T
The Cockshutt 1950-T is a row-crop tractor produced from 1967 to 1969. It is essentially the same model as the Oliver 1950-T. It features a Waukesha-Oliver 5.1L 6-cylinder turbocharged diesel engine, with multiple transmission options including gear, two-speed power shift, and partial power shift. The tractor offers up to 105 hp PTO power and has options for two- or four-wheel drive. It includes hydraulic power steering, differential disc brakes, and an open operator station with an optional cab. The tractor supports various attachments such as the Oliver 1810 Loader with a 2500 lbs lift capacity. Dimensions include a 109.1 inch wheelbase and operating weights ranging from 10,460 lbs to 11,490 lbs depending on drive configuration.
Power116 hp[P]
Founded1964 - 1969
Model1950-T
Technical Specifications
Detailed specifications and technical data for Cockshutt 1950-T
Power
| PTO (tested) | 105.24 hp (78.5 kW) |
|---|---|
| PTO (claimed) | 105 hp (78.3 kW) |
| Drawbar (tested) | 89.10 hp (66.4 kW) |
Engine
| Type | turbocharged diesel, 6-cylinder, liquid-cooled |
|---|---|
| Model | Waukesha-Oliver 5.1L 6-cyl diesel |
| Fuel tank | 27.5 gal (104.1 L), 78 gal (fender tanks) (295.2 L) |
| Rated RPM | 2400 |
| Air cleaner | dual dry pre-cleaners |
| Bore/Stroke | 3.875x4.375 inches (98 x 111 mm) |
| Compression | 16:1 |
| Displacement | 310 ci (5.1 L) |
| Oil capacity | 11.5 qts (10.9 L) |
| Starter volts | 12 |
| Coolant capacity | 20 qts (18.9 L) |
Weight
| Ballasted | 20,220 lbs (4WD) (9171 kg) |
|---|---|
| Operating | 10,460 lbs (2WD) (4744 kg), 11,490 lbs (4WD) (5211 kg) |
Dimensions
| Length | 159.5 inches (405 cm) |
|---|---|
| Wheelbase | 109.1 inches (277 cm) |
| Rear tread | 67 to 109 inches (170 to 276 cm) |
| Front tread | 67.5 to 91.6 inches (171 to 232 cm) |
| Ground clearance | 25.5 inches (64 cm) |
| Height (steering wheel) | 79.4 inches (201 cm) |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 2050 psi (141.3 bar) |
| Pump flow | 16.7 gpm (63.2 lpm) |
Mechanical
| Drive | Two- or four-wheel drive |
|---|---|
| Brakes | Differential disc brakes |
| Steering | hydraulic power |
| Operator station | Open operator station. Optional cab. |
Production
| Type | Row-Crop tractor |
|---|---|
| Years made | 1967 - 1969 |
Attachments
| Loader | Oliver 1810 Loader |
|---|---|
| Dump angle | 45° dump |
| Bucket width | 78 inches (198 cm) |
| Boom cylinder | 3 inches (7 cm) |
| Lift capacity | 2500 lbs lift (full at pin) (1134 kg) |
| Breakout force | 4500 lbs breakout (2041 kg) |
| Reach (dumped) | 36 inches (91 cm) |
| Reach (ground) | 87 inches (220 cm) |
| Height (at pin) | 168 inches (426 cm) |
| Clearance (dumped) | 140 inches (355 cm) |
| Rollback (ground line) | 8° rollback |
Transmission
| Options | 6-speed gear, 12-speed two-speed power shift, 18-speed partial power shift |
|---|---|
| 6-speed gear | Typegear Gears6 forward and 2 reverse Clutch330mm cera-metallic disc |
| 18-speed partial power shift | Typepartial power shift Gears18 forward and 6 reverse Clutch330mm cera-metallic disc DescriptionThe Hydraul-Shift provides an on-the-move power shift to a higher or lower range for each of the six forward, and two reverse, gears. TransmissionHydraul-Shift |
| 12-speed two-speed power shift | Typetwo-speed power shift Gears12 forward and 6 reverse Clutch330mm cera-metallic disc TransmissionHydra-Power |
Tractor hitch
| Control | position and lower-link draft control |
|---|---|
| Rear Type | II, III |
| Rear lift (at ends) | 6000 lbs (2721 kg) |
Power Take-off (PTO)
| Rear PTO Type | 540, 540/1000 |
|---|