Tractorpedia.com

Ford 2910

Ford 2910 tractor
View Images
The Ford 2910 is a utility tractor produced from 1983 to 1989 as part of the 10 Utility Series. It features a Ford 2.9L 3-cylinder diesel engine with 40.5 hp rated power and a gross engine power of 44 hp. The tractor offers multiple transmission options including 8-speed, 8-speed synchromesh, and 6-speed mechanical shuttle. It has two- or four-wheel drive with inboard planetary final drives and mechanical rear differential lock. The hydraulic system is open center with a capacity of 12.1 gallons and a pressure of 2500 psi. The tractor is equipped with a rear independent PTO operating at 540 RPM at 1800 engine RPM. Dimensions vary between 2WD and 4WD models with wheelbases of 77.5 and 84.1 inches respectively. Operating weight ranges from 4413 to 4948 pounds. Various front-end loader attachments are available including the 776A, 776B, 7309, and 7310 loaders with different lift capacities and reach specifications.
Ford 2910utility tractor2.9L diesel engine40.5 hp8-speed transmissionhydraulic systemPTOfront-end loadertractor specifications
Power40 hp
Founded1983 - 1989
Model2910

Technical Specifications

Detailed specifications and technical data for Ford 2910

Power

Engine:40.5 hp
PTO (tested):36.62 hp
PTO (claimed):36 hp
Engine (gross):44 hp
Drawbar (tested):29.09 hp

Engine

Type:Ford 2.9L 3-cyl diesel

Height

Hood:52.7 inches
ROPS:93.7 inches
Exhaust:81.2 inches
Steering wheel:58.8 inches

Weight

Ballasted:6000 lbs
2WD Operating:4413 lbs
4WD Operating:4948 lbs

Capacity

Fuel:13 gal
Hydraulic system:12.1 gal

Variants

2910:utility tractor
2910 LCG:mowing tractor

Electrical

Ground:negative
Battery AH:128
Battery volts:12
Charging system:alternator
Mk I Charging amps:32
Mk II Charging amps:51

Hydraulics

Type:open center
Capacity:12.1 gal
Pressure:2500 psi
Pump flow:7.7 gpm
Steering flow:3.6 gpm
Optional pump flow:12.8 gpm

Mechanical

ROPS:Two-post fixed ROPS. Cab optional.
Drive:Two- or four-wheel drive
Steering:power assist
Final drives:inboard planetary
Differential lock:mechanical rear
Differential wet disc brakes:-

Production

Type:Utility tractor
Series:10 Utility Series
Years made:1983 - 1989
Original price:$16,000 in 1989

Attachments

Overview:front-end loader
7309 Loader:2450 lbs lift (full at pin), 4245 lbs breakout, 14 inches reach (dumped), 120 inches height (at pin), 112 inches clearance (dumped)
7310 Loader:2685 lbs lift (full at pin), 4905 lbs breakout, 40° dump, 34.25 inches reach (dumped), 43° rollback, 120 inches height (at pin), 92 inches clearance (dumped), Bucket width: 60 inches, 72 inches, 84 inches
776A Loader:2500 lbs lift (full at pin), 3750 lbs breakout, 40° dump, 26 inches reach (dumped), 75 inches reach (ground), 6° rollback, 124 inches height (at pin), 102 inches clearance (dumped), weight: 1035 lbs, Bucket width: 48 inches, 60 inches, 72 inches
776B Loader:2500 lbs lift (full at pin), 3750 lbs breakout, 40° dump, 26 inches reach (dumped), 75.2 inches reach (ground), 6° rollback, 124 inches height (at pin), 102 inches clearance (dumped), weight: 1260 lbs, Bucket width: 48 inches, 60 inches, 72 inches

Transmission

Clutch:330mm dry disc
Options:8-speed, 8-speed synchromesh, 6-speed mechanical shuttle
Dual Range:8 forward and 2 reverse
Synchromesh:8 forward and 4 reverse
Mechanical shuttle:6 forward and 4 reverse
Oil capacity (Dual Range):12.7 qts
Oil capacity (Synchromesh):9.9 qts

Tractor hitch

Control:position and top-link draft control
Rear Type:I

Dimensions & Tires

Width:68.4 inches
Length:127.2 inches
Rear tire:12.4-28, 16.9-24, 13.6-28
Front tire:5.50-16 (2WD), 8.3-24 (4WD), 6.00-16 (2WD)
Rear tread:56 to 80 inches
2WD Wheelbase:77.5 inches
4WD Wheelbase:84.1 inches
2WD Front tread:52 to 80 inches
4WD Front tread:56 to 72 inches
Clearance (rear axle):20.5 inches
2WD Clearance (front axle):21.5 inches
4WD Clearance (front axle):13.1 inches

Power Take-off (PTO)

Rear PTO:independent
Engine RPM:540@1800
Rear PTO Type:540