Tractorpedia.com

International Harvester 3088

The International Harvester 3088 is a row-crop tractor produced from 1981 to 1985 as part of the 30 Series. Built in Rock Island, Illinois, USA, a total of 1,065 units were made. It features a 5.9L 6-cylinder diesel engine producing approximately 88.9 hp estimated engine power, with a 16-speed partial power shift transmission. The tractor offers two- or four-wheel drive options, power steering, hydraulic wet disc brakes, and a four-post ROPS standard with optional cab or open-station configurations. It has a fuel capacity of 50 gallons and a hydraulic system capacity of 22.5 gallons. Dimensions include a 105-inch wheelbase, 184-inch length, and operating weight up to 11,940 lbs with cab. The 3088 is equipped with rear PTO independent type with 540/1000 RPM options and uses 9.5L-15 front tires and 18.4-34 rear tires.
International Harvester 3088IH 3088tractor specsfarm tractor5.9L diesel engine16-speed transmissionrow-crop tractor
Power88 hp[P]
Founded1981 - 1985
Model3088

Technical Specifications

Detailed specifications and technical data for International Harvester 3088

Power

PTO (tested):81.35 hp (60.7 kW)
PTO (claimed):80 hp (59.7 kW)
Drawbar (tested):70.31 hp (52.4 kW)
Drawbar (claimed):70 hp (52.2 kW)

Engine

Type:diesel
Model:International Harvester D358
Cooling:liquid-cooled
Idle RPM:900-2400
Cylinders:6-cylinder
Rated RPM:2400
Air cleaner:dual dry element
Bore/Stroke:3.875x5.0625 inches (98 x 129 mm)
Displacement:358 ci (5.9 L)
Oil capacity:11 qts (10.4 L)
Starter volts:12
Coolant capacity:24 qts (22.7 L)
Compression ratio:16.4:1

Capacity

Fuel:50 gal (189.2 L)
Hydraulic system:22.5 gal (85.2 L)

Electrical

Ground:negative
Battery volts:12

Hydraulics

Type:open center
Valves:2 or 3
Capacity:22.5 gal (85.2 L)
Pump flow:15 gpm (56.8 lpm)
Total flow:27 gpm (102.2 lpm)
Steering flow:12 gpm (45.4 lpm)

Mechanical

ROPS:Four-post ROPS standard. Available with cab or as open-station tractor.
Drive:Two- or four-wheel drive
Brakes:Hydraulic wet disc brakes
Steering:Power steering

Production

Type:Row-Crop tractor
Series:30 Series
Built in:Rock Island, Illinois, USA
Total built:1,065
Original price:$28,900 in 1985
Years produced:1981 - 1985

Transmission

Type:partial power shift
Gears:16 forward and 8 reverse
Clutch:cerametallic disc
Description:Left lever selects gear, right lever selects high, low, or reverse range. Tractor may be shifted on the move without the clutch between gear pairs (1-2, 3-4, etc). Synchronized shifting, using the clutch, between gear pairs (2 to 3, 4 to 5, etc). The transmission is four-gear with the powershift provided by an eletcric solenoid actuated Torque Amplifier.
Oil capacity:90 qts (85.2 L)

Tractor hitch

Control:draft sensing
Rear Type:II

Serial Numbers

Location:Serial number plate on the right side of the tractor frame, ahead of the rear axle.

Dimensions & Tires

Width:102 inches (259 cm) (Width at minimum tread.)
Length:184 inches (467 cm)
Rear axle:3.25 by 104 inches (82 by 2641 mm), 3.25 by 118 inches (82 by 2997 mm)
Rear tire:18.4-34
Wheelbase:105 inches (266 cm)
Front tire:9.5L-15
Rear tread:60 to 127.5 inches (152 to 323 cm)
Front tread:60 to 84 inches (152 to 213 cm)
Height (cab):112 inches (284 cm)
Shipping weight:10600 lbs (4808 kg)
Ground clearance:13 inches (33 cm)
Operating weight:11940 lbs (5415 kg) (With cab.)

Power Take-off (PTO)

Rear PTO:independent
Engine RPM:540@2100, 1000@2100
Rear PTO Type:540/1000

Related Models

International Harvester 3288

Model:3288

International Harvester 786

Model:786