John Deere

John Deere 2840

The John Deere 2840 is a utility tractor produced from 1977 to 1979. It was built in Mannheim, Germany and originally priced at $17,000 in 1979. It features a 5.4L 6-cylinder liquid-cooled diesel engine producing an estimated 89.6 hp, with a 12-speed two-speed power shift or 6-speed sliding gear transmission. The tractor has a two-wheel drive with planetary final drives, mechanical rear differential lock, and power assist steering. It has a fuel capacity of 28 gallons and a hydraulic system capacity of 12.9 gallons. The 2840 includes a rear PTO with 540/1000 rpm independent operation and a hydraulic 300mm disc clutch. Dimensions include a 97 inch wheelbase, 160 inch length, and 8700 lbs operating weight. The tractor supports a variety of tires and has an optional two-post Roll-Gard ROPS. Attachments include the 148 Loader with various bucket sizes and capacities.
Power89 hp[P]
Founded1977 - 1979
Model2840

Technical Specifications

Detailed specifications and technical data for John Deere 2840

Power
PTO (tested)80.65 hp (60.1 kW)
Drawbar (tested)64.86 hp (48.4 kW)
Tires
Ag rear18.4-34, 15.5-38, 16.9-38
Ag front7.50-18
Engine
Typediesel
Coolingliquid-cooled
Cylinders6-cylinder
Rated RPM2500
Air cleanerpaper elements
Bore/Stroke4.02x4.33 inches (102 x 110 mm)
Displacement329 ci (5.4 L)
ManufacturerJohn Deere
Starter volts12
Coolant capacity5 qts (4.7 L)
Compression ratio17.0:1
Capacity
Fuel28 gal (106.0 L)
Hydraulic system12.9 gal (48.8 L)
Dimensions
Width90 inches (228 cm)
Length160 inches (406 cm)
Wheelbase97 inches (246 cm)
Rear tread61 to 90 inches (154 to 228 cm) (ROPS or fenders limit minimum tread to 68 inches)
Front tread57.82.4 to inches (146 to 0 cm), 69 to 94 inches (175 to 238 cm) (wide axle)
Ballasted weight10500 lbs (4762 kg)
Operating weight8700 lbs (3946 kg)
Clearance (front axle)21 inches (53 cm)
Height (steering wheel)74 inches (187 cm)
Electrical
Groundnegative
Batteries2
Battery volts12
Charging systemalternator
Hydraulics
Typeclosed center
Valves2
Capacity12.9 gal (48.8 L)
Pump flow23 gpm (87.1 lpm)
Mechanical
DriveTwo-wheel drive
BrakesDifferential hydraulic wet disc brakes
Steeringpower assist
Final drivesplanetary
Operator stationOpen operator station. Two-post Roll-Gard ROPS optional.
Differential lockmechanical rear
Production
TypeUtility tractor
Built inMannheim, Baden-Württemberg, Germany
Original price$17,000 in 1979
Years produced1977 - 1979
Attachments
Weight1350 lbs (612 kg)
Dump angle38°
Loader model148 Loader
Boom cylinder2.5 inches (6 cm)
Bucket widths60 inches (152 cm), 72 inches (182 cm), 84 inches (213 cm), 96 inches (243 cm)
Lift capacity3100 lbs lift (full at pin) (1406 kg)
Breakout force4700 lbs breakout (2131 kg)
Reach (dumped)32 inches (81 cm)
Rollback angle11°
Bucket cylinder2.5 inches (6 cm)
Height (at pin)126 inches (320 cm)
Bucket capacities0.5 cu yd (0.4 cu m), 0.6 cu yd (0.5 cu m), 0.8 cu yd (0.6 cu m), 0.9 cu yd (0.7 cu m)
Clearance (level)121 inches (307 cm)
Clearance (dumped)102 inches (259 cm)
Transmission
Typetwo-speed power shift
Gears12 forward and 6 reverse
Clutchdry disc
DescriptionThree gears (1-3) in two ranges (I/II) plus reverse (R) range with a high/low power shift
Alternate gears6 forward and 3 reverse
Transmission options12-speed two-speed power shift, 6-speed
Alternate transmissionsliding gear
Tractor hitch
Controldraft sensing
Rear TypeII
Serial Numbers
1977214909
1978264711
1979304654
Serial number locationSerial number plate on the right side of the 2840 frame, above the front axle.
Power Take-off (PTO)
Clutchhydraulic 300mm disc
Rear PTOindependent
Rear PTO Type540/1000