John Deere 50
The John Deere 50 was introduced to replace the model B. These new tractors offered a number of advancements including duplex carburetion, live Powr-Trol hydraulics, and a fully-independent PTO.
Power31 hp[B]
Founded1952 - 1956
Model50
Technical Specifications
Detailed specifications and technical data for John Deere 50
Power
| Plows | 2 |
|---|---|
| Belt (tested) | 31.20 hp (23.3 kW) |
| Belt (claimed) | 30.97 hp (23.1 kW) |
| Drawbar (tested) | 28.11 hp (21.0 kW) |
Tires
| Ag rear | 10-38 |
|---|---|
| Ag front | 5.50-16 |
Engine
| Rated RPM | 1250 |
|---|---|
| Air cleaner | oil bath |
| Bore/Stroke | 4.6875x5.50 inches (119 x 140 mm) |
| Displacement | 190.4 ci (3.1 L) |
| Firing order | 1-2 |
| LP gas engine | John Deere, LP gas, 2-cylinder, liquid-cooled |
| Starter volts | 12 |
| Engine options | John Deere 3.1L 2-cyl gasoline, John Deere 3.1L 2-cyl all-fuel, John Deere 3.1L 2-cyl LP gas |
| All-fuel engine | John Deere, all-fuel, 2-cylinder, liquid-cooled |
| Gasoline engine | John Deere, gasoline, 2-cylinder, liquid-cooled |
| Coolant capacity | 23 qts (21.8 L) early non-pressurized system, 19 qts (18.0 L) later |
| Compression (LP gas) | 8:1 |
| Compression (all-fuel) | 5.35:1 |
Dimensions
| Width | 86.625 inches (220 cm) |
|---|---|
| Height | 59.825 inches (151 cm) |
| Length | 132.75 inches (337 cm) |
| Wheelbase | 90 inches (228 cm) |
| Rear tread | 56 to 88 inches (142 to 223 cm) |
| Front tread | 7.3/11.2 inches (18/28 cm) |
| Ballasted weight | 5439 lbs (2467 kg) With fluid in rear tires |
| Operating weight | 4855 lbs (2202 kg) Gasoline tractor with cast 11-38 rear wheels |
Electrical
| Ground | Positive |
|---|---|
| Batteries | 2 |
| Battery AH | 85 |
| Battery volts | 6 |
| Charging system | generator |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 930 psi (64.1 bar) |
| Pump flow | 8.9 gpm (33.7 lpm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Expanding shoe brakes |
| Steering | manual, power (Power steering became an option in 1954) |
| Operator station | Open operator station with padded seat |
Production
| Type | Row-Crop tractor |
|---|---|
| Notes | The John Deere 50 was introduced to replace the model B. These new tractors offered a number of advancements including duplex carburetion, live Powr-Trol hydraulics, and a fully-independent PTO. |
| Built in | Waterloo, Iowa, USA |
| Years made | 1952 - 1956 |
| Total built | 32,574 (total) |
| LP-gas built | 731 (LP-gas) |
| All-fuel built | 2,097 (all-fuel) |
| Gasoline built | 29,746 (gas) |
| Original price | $2,011 in 1954 |
Attachments
| Loader | front-end loader |
|---|
Belt Pulley
| RPM | 1250 |
|---|---|
| Speed | 3170 ft/min (966.22 meters/min) |
| Width | 7.25 inches (18 cm) |
| Diameter | 9.7 inches (24 cm) |
Transmission
| Type | unsynchronized gear |
|---|---|
| Gears | 6 forward and 1 reverse |
| Clutch | mechanical dry disc |
Serial Numbers
| 1952 | 5000001 |
|---|---|
| 1953 | 5001257 |
| 1954 | 5016620 |
| 1955 | 5021977 |
| 1956 | 5030600 |
| End | 5033751 |
Power Take-off (PTO)
| Rear PTO | independent (Optional) |
|---|---|
| Rear PTO Type | 540 (1.375) |
More John Deere models
View all John Deere modelsJohn Deere 100FModel100F
John Deere 1010Model1010
John Deere 1010CModel1010C
John Deere 1020Model1020
John Deere 1020 VUModel1020 VU
John Deere 1023EModel1023E
John Deere 1025RModel1025R
John Deere 1026RModel1026R
John Deere 1030Model1030
John Deere 1030VUModel1030VU
John Deere 1035Model1035
John Deere 1040Model1040
