John Deere

John Deere 8220

The John Deere 8220 is a row-crop tractor produced from 2002 to 2005 as part of the 8020 Series. It was built in Waterloo, Iowa, USA. The tractor features a John Deere 8.1L 6-cylinder turbocharged diesel engine with electronic high-pressure common rail fuel system, delivering up to 256 hp gross power. It has a 16-speed full power shift John Deere PowerShift transmission with hydraulic wet disc clutch. The 8220 offers two- or four-wheel drive options, hydrostatic power steering, and hydraulic wet disc brakes. It includes a standard cab and various hydraulic and hitch capacities. The tractor's dimensions and weights vary by configuration, with multiple tire options and front axle types. Electrical system includes a 150 amp alternator and two 12-volt batteries. Variants include a wheeled tractor and a crawler version (8220T).
Power233 hp
Founded2002 - 2005
Model8220

Technical Specifications

Detailed specifications and technical data for John Deere 8220

Power
Engine (max)256 hp (190.9 kW)
Engine (net)225 hp (167.8 kW)
PTO (tested)222.35 hp (165.8 kW)
PTO (claimed)190 hp (141.7 kW)
Engine (gross)233 hp (173.7 kW)
Drawbar (tested)164.50 hp (122.7 kW)
Engine
Typeturbocharged diesel
Coolingliquid-cooled inline
Idle RPM900-2300
Cylinders6-cylinder
Rated RPM2200
Air cleanerdry with secondary element
Bore/Stroke4.56x5.06 inches (116 x 129 mm)
Compression16.5:1
Fuel systemelectronic high-pressure common rail (HPCR)
Displacement496 ci (8.1 L)
ManufacturerJohn Deere
Oil capacity24.8 qts (23.5 L)
Operating RPM1500-2200
Starter volts12
Coolant capacity35.9 qts (34.0 L)
Rated Power (net)225 hp (167.8 kW)
Maximum Power (net)250 hp (186.4 kW)
Oil change interval250 h
Rated Power (gross)233 hp (173.7 kW)
Maximum Power (gross)256 hp (190.9 kW)
Weight
Shipping19,100 lbs (2WD) (8663 kg), 21,050 lbs (4WD) (9548 kg), 21,650 lbs (long frame) (9820 kg), 22,450 lbs (ILS) (10183 kg)
Operating20,045 lbs (4WD 480/80R46 duals) (9092 kg)
Max Drawbar3,900 lbs (Cat 3 extended) (1769 kg), 6,070 lbs (Cat 3 short) (2753 kg), 10,000 lbs (Cat 4) (4536 kg)
Capacity
Fuel135 gal (511.0 L), 160 gal (optional) (605.6 L)
Front hubs3.6 qts (3.4 L), 4.2 qts (ILS) (4.0 L)
Front diff.14.2 qts (13.4 L)
Hydraulic system37 gal (140.0 L), 39.6 gal (ILS) (149.9 L)
Variants
8220wheeled tractor
8220Tcrawler
Electrical
Groundnegative
Batteries2
Battery CCA925
Battery volts12
Charging amps150
Charging systemalternator
Hydraulics
Typeclosed center pressure-flow compensated (PFC)
Valves5
Capacity37 gal (140.0 L), 39.6 gal (ILS) (149.9 L)
Pressure2900 psi (200.0 bar)
SCV flow30 gpm (113.6 lpm)
Total flow33.5 gpm (126.8 lpm) with standard 45cc pump, 42.5 gpm (160.9 lpm) optional 57cc pump
Mechanical
Cabstandard
DriveTwo- or four-wheel drive
BrakesHydraulic wet disc brakes
Steeringhydrostatic power
Production
TypeRow-Crop tractor
Series8020 Series
Built inWaterloo, Iowa, USA
Years produced2002 - 2005
Transmission
Typefull power shift
Gears16 forward and 4 reverse
Clutchhydraulic wet disc
FeaturesFull power shift transmission with single shift lever with display on cab corner post. Tractor begins in 7 (forward) and 2 (reverse) on start up. Clutch pedal may be used to pre-select a gear by holding clutch and pressing lever until desired gear is reached. Automatic PowerShift (APS) allows automated shifting to match load.
Oil capacity148 qts (140.1 L), 158.4 qts (ILS) (149.9 L)
TransmissionJohn Deere PowerShift
Tractor hitch
Rear TypeIII/IIIN
Rear lift12300 lbs (5579 kg), 15180 lbs (Optional) (6885 kg)
Front lift11000 lbs (4989 kg)
Front HitchIIIN (Optional)
Serial Numbers
20021001
200310001
200420001
200530001
LocationRear of tractor.
Dimensions & Tires
Length209.9 inches (533 cm), 211.9 inches (long frame) (538 cm)
Rear tire18.4R46
Wheelbase123.6 inches (2WD) (313 cm), 116.9 inches (4WD) (296 cm), 115.7 inches (ILS) (293 cm), 118.9 inches (long frame) (302 cm)
Front axle2WD, MFWD, MFWD ILS
Front tire11.00-24, 16.9R30 (4WD)
Height (cab)120.2 inches (305 cm)
2WD Front tread60 to 88 inches (152 to 223 cm)
4WD Front tread60 to 80 inches (152 to 203 cm)
ILS Front tread60 to 88 inches (152 to 223 cm)
Rack-and-pinion rear axle4.331 by 118.5 inches (110 by 3009 mm), 4.724 by 118.5 inches (119 by 3009 mm)
Power Take-off (PTO)
Clutchhydraulic wet discs
Rear PTOindependent
Engine RPM540@1975, 1000@2200
Rear PTO Type1000 (1.75), 540/1000 (1.375 optional)