Tractorpedia.com

Mahindra 4010

Mahindra 4010 tractor
View Images
The Mahindra 4010 is a compact utility tractor produced from 2012 to 2015 as part of the 10 Series. It features a 38 hp Daedong 1.8L 3-cylinder liquid-cooled diesel engine, with a 9-speed constant mesh or hydrostatic transmission options. The tractor offers four-wheel drive, hydrostatic power steering, wet disc brakes, and a two-post foldable ROPS. It has a fuel tank capacity of 9 gallons (34.1 L) and weighs approximately 3,065 lbs (1390 kg). The 4010 supports various attachments including a front-end loader and backhoe, with detailed specifications for the ML140 loader and Mahindra ANBH76 backhoe. Hydraulics are open center type with optional 2 valves and a pump flow of 8.2 gpm. The tractor's PTO is independent with a 540 rpm rear PTO. Tires are standard ag sizes 8x16 front and 12.4x24 rear, with industrial tire options available.
Mahindra 4010compact utility tractor38 hp tractorDaedong 1.8L engine9-speed transmissionhydrostatictractor attachmentsML140 loaderANBH76 backhoe
Power38 hp
Founded2012 - 2015
Model4010

Technical Specifications

Detailed specifications and technical data for Mahindra 4010

Power

Engine power:38 hp (28.3 kW)
Gear PTO (claimed):31 hp (23.1 kW)
Hydro PTO (claimed):29 hp (21.6 kW)

Engine

Type:diesel
Model:Daedong 3B183LW
Power:38 hp (28.3 kW)
Cooling:liquid-cooled
Starter:electric
Cylinders:3-cylinder
Fuel tank:9 gal (34.1 L)
Rated RPM:2600
Bore/Stroke:3.43x4.03 inches (87 x 102 mm)
Displacement:111.4 ci (1.8 L)
Starter volts:12
Compression ratio:22:1

Overview

Series:10 Series
Category:Compact Utility tractor
Horsepower:38.0 hp
Production years:2012 - 2015

Electrical

Ground:negative
Batteries:12
Battery AH:80
Battery volts:12
Charging amps:50
Charging system:alternator

Hydraulics

Type:open center
Valves:2 (optional)
Pump flow:8.2 gpm (31.0 lpm)
Steering flow:4.5 gpm (17.0 lpm)

Mechanical

ROPS:Two-post foldable ROPS
Drive:Four-wheel drive
Brakes:Wet disc brakes
Steering:hydrostatic power

Attachments

Overview:Front-end loader, Backhoe

ML140 Loader

Weight:1,177 lbs (533 kg)
Dump time:3.1s
Dump angle:50°
Lower time:2.4s
Raise time:3.8s
Reach (dumped):17.6 inches (44 cm)
Rollback angle:35°
Height (at pin):101.9 inches (258 cm)
Clearance (dumped):71 inches (180 cm)
Breakout force (at pin):3,430 lbs (1555 kg)
Lift capacity (full at pin):2,041 lbs (925 kg)

Mahindra ANBH76 Backhoe

Weight:1,050 lbs (476 kg)
Swing Arc:180°
Bucket force:3,080 lbs (1397 kg)
Digging depth:90 inches (228 cm)
Loading height:79 inches (200 cm)
Bucket Rotation:180°
Reach from pivot:112 inches (284 cm)
Dipperstick force:2,160 lbs (979 kg)
2-Foot flat digging depth:90 inches (228 cm)

Transmission

Clutch:dry disc
Options:9-speed constant mesh, hydrostatic
Hydrostatic type:hydrostatic
Constant mesh type:constant mesh
Gears (hydrostatic):infinite forward and reverse (3-range)
Gears (constant mesh):9 forward and 3 reverse

Tractor hitch

Control:position control
Rear Type:1
Rear lift capacity:2,646 lbs (1200 kg)

Dimensions & Tires

Width:59.8 inches (151 cm)
Length:119.3 inches (303 cm)
Weight:3,065 lbs (1390 kg)
Rear tire:12.4x24
Front tire:8x16
Industrial rear:43x14-20
Industrial front:10-16.5
Standard tires (ag):Front: 8x16. Rear: 12.4x24

Power Take-off (PTO)

Rear PTO:independent
Engine RPM:540@2650
Rear PTO Type:540