Minneapolis-Moline

Minneapolis-Moline G350

The Minneapolis-Moline G350 is a utility tractor produced from 1971 to 1975. It features a Fiat 2.6L 3-cylinder liquid-cooled diesel engine with 41 hp PTO power. The tractor offers two- or four-wheel drive options, a 6-speed partially synchronized transmission with a 9-speed creeper, and planetary final drives. It has an open operator station and mechanical band brakes. The G350 supports various attachments including Cockshutt 1522 and 1524 loaders. It has a fuel capacity of 14.25 gallons and a hydraulic system capacity of 4.5 gallons with open center hydraulics. Dimensions vary between 2WD and 4WD models, with shipping weights from 3710 to 4300 pounds. The tractor uses 12-volt electrical system with a 42 amp alternator.
Power45 hp[P]
Founded1971 - 1975
ModelG350

Technical Specifications

Detailed specifications and technical data for Minneapolis-Moline G350

Power
PTO (claimed)41 hp (30.6 kW)
Tires
2WD Ag rear13.6-28, 12.4-28, 14.9-28
4WD Ag rear12.4-28
2WD Ag front6.00-16, 7.50-16
4WD Ag front7.50x20
Engine
ModelFiat 2.6L 3-cyl diesel
Coolingliquid-cooled
Rated RPM2400
Air cleaneroil bath
Bore/Stroke3.94x4.33 inches (100 x 110 mm)
Pre-heatingthermostart
Displacement158.1 ci (2.6 L)
Oil capacity8 qts (7.6 L)
Starter volts12
Coolant capacity13.5 qts (12.8 L)
Compression ratio17:1
Capacity
Fuel14.25 gal (53.9 L)
Hydraulic system4.5 gal (17.0 L)
Dimensions
Width62.5 inches (158 cm) Minimum width
Wheelbase75.5 inches (191 cm)
2WD Length115 inches (292 cm)
4WD Length119.5 inches (303 cm)
Rear tread47.25 to 74.75 inches (120 to 189 cm)
2WD Front tread50.4 to 78 inches (128 to 198 cm)
4WD Front tread55/59 inches (139/149 cm)
2WD Shipping weight3710 lbs (1682 kg)
4WD Shipping weight4300 lbs (1950 kg)
2WD Clearance (front axle)18.25 inches (46 cm)
4WD Clearance (front axle)14 inches (35 cm)
2WD Height (steering wheel)56.6 inches (143 cm)
Electrical
Battery volts12
Charging amps42
Charging systemalternator
Hydraulics
Typeopen center
Capacity4.5 gal (17.0 L)
Pressure2133 psi (147.1 bar)
Pump flow5.76 gpm (21.8 lpm)
Mechanical
DriveTwo- or four-wheel drive
BrakesMechanical band brakes
Final drivesplanetary
Operator stationOpen operator station
Production
TypeUtility tractor
Original price$6,900 in 1975
Years produced1971 - 1975
Attachments
LoadersCockshutt 1522 loader, Cockshutt 1524 loader
Cockshutt 1522 Loader1930 lbs lift (full at pin) (875 kg), 3200 lbs breakout (1451 kg), 45° dump, 30 inches reach (dumped) (76 cm), 76 inches reach (ground) (193 cm), 25° rollback, 109 inches height (at pin) (276 cm), 85 inches clearance (dumped) (215 cm), boom cyl: 2.00 inches (5 cm), bucket cyl: 2.25 inches (5 cm), Bucket width: 48 inches (121 cm), 60 inches (152 cm), 72 inches (182 cm)
Cockshutt 1524 Loader1800 lbs lift (full at pin) (816 kg), 4600 lbs breakout (2086 kg), 45° dump, 38 inches reach (dumped) (96 cm), 67 inches reach (ground) (170 cm), 24° rollback, 120 inches height (at pin) (304 cm), 103 inches clearance (dumped) (261 cm), boom cyl: 2.50 inches (6 cm), bucket cyl: 2.25 inches (5 cm), Bucket width: 48 inches (121 cm), 60 inches (152 cm), 72 inches (182 cm)
Transmission
Typepartially synchronized
Gears6 forward and 2 reverse
Clutch254mm dry disc
Creeper9-speed creeper (9 forward and 3 reverse)
Oil capacity18 qts (17.0 L)
Synchronized shiftsbetween gears 2-3 and 5-6
Tractor hitch
Controlposition and draft control
Rear TypeII/I
Rear lift capacity2660 lbs (1206 kg)
Serial Numbers
1971302402
1972304497
1973307221
1974314369
1975317000
Final321497
LocationSerial number plate below instrument panel.
Power Take-off (PTO)
Rear PTOlive Dual-stage clutch
Engine RPM540@1970
Rear PTO Type540/ground