Snapper lawn tractors
Snapper 28083
The Snapper 28083 is a riding lawn mower produced from 1979 to 1982 as part of the 3 Series. It features an 8 hp (6.0 kW) 1-cylinder air-cooled vertical-shaft gasoline engine with a 1.75 gallon (6.6 L) fuel tank. The mower uses a 5-speed friction disc transmission with 5 forward and 1 reverse gear. It has two-wheel drive and manual steering with an open operator station. The mower includes a mid PTO with an independent pulley type clutch. Tires are sized 10.50x4.10-4 front and 16x6.50-8 rear. Electrical system is 12 volts with negative ground. Attachments include a 28" mid-mount mower deck with a 1-blade manual lift and a 36" front-mount blade with manual lift and angle adjustments. The Snapper 28083 was built in McDonough, Georgia, USA.
Power8 hp
Founded28" deck
Model28083
Technical Specifications
Detailed specifications and technical data for Snapper 28083
Engine
| Type | gasoline |
|---|---|
| Cooling | air-cooled vertical-shaft |
| Starter | manual recoil, electric Optional |
| Cylinders | 1-cylinder |
| Fuel tank | 1.75 gal (6.6 L) |
| Power (gross) | 8 hp (6.0 kW) |
| Starter volts | 12 |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Riding lawn mower |
|---|---|
| Series | 3 Series |
| Built in | McDonough, Georgia, USA |
| Years produced | 1979 - 1982 |
Attachments
| 36" Blade | Snapper front-mount, 36 inches width (91 cm), manual-lift, manual-angle |
|---|---|
| 28" mid-mount mower deck | 28 inches (71 cm) cutting width, mid-mount Snapper, 1-blade with manual lift, belt drive |
Transmission
| Type | friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Dimensions & Tires
| Rear tire | 16x6.50-8 |
|---|---|
| Front tire | 10.50x4.10-4 |
Power Take-off (PTO)
| Clutch | manual |
|---|---|
| PTO type | independent |
| Mid PTO Type | pulley |
| PTO location | Mid PTO |