Snapper lawn tractors
Snapper 28113
The Snapper 28113 is a riding lawn mower produced from 1979 to 1982 as part of the 3 Series. It features an 11 hp (8.2 kW) 1-cylinder air-cooled vertical-shaft gasoline engine with electric start and a 1.75 gallon (6.6 L) fuel tank. The transmission is a 5-speed friction disc with 5 forward and 1 reverse gear. It has two-wheel drive and manual steering with an open operator station. Tires are lawn/turf type with sizes 10.50x4.10-4 front and 16x6.50-8 rear. The mower includes a mid PTO with independent pulley type and manual clutch. Attachments include a 28" mid-mount mower deck with belt drive and a 36" front-mount blade with manual lift and angle. The Snapper 28113 was built in McDonough, Georgia, USA.
Power11 hp
Founded28" deck
Model28113
Technical Specifications
Detailed specifications and technical data for Snapper 28113
PTO
| Clutch | manual |
|---|---|
| PTO type | independent |
| Mid PTO Type | pulley |
| PTO location | Mid PTO |
Power
| Power (gross) | 11 hp (8.2 kW) |
|---|
Engine
| Type | gasoline |
|---|---|
| Cooling | air-cooled vertical-shaft |
| Starter | electric |
| Cylinders | 1-cylinder |
| Fuel tank | 1.75 gal (6.6 L) |
| Power (gross) | 11 hp (8.2 kW) |
| Starter volts | 12 |
Dimensions
| Rear tire | 16x6.50-8 |
|---|---|
| Front tire | 10.50x4.10-4 |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Production
| Type | Riding lawn mower |
|---|---|
| Series | 3 Series |
| Built in | McDonough, Georgia, USA |
| Years produced | 1979 - 1982 |
Attachments
| Blade | 36" front-mount blade, 36 inches (91 cm) width, manual-lift, manual-angle |
|---|---|
| 28" mid-mount mower deck | 28 inches (71 cm) cutting width, belt drive, 1-blade with manual lift |
Transmission
| Type | friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Steering and drive
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |