Snapper lawn tractors
Snapper 3011X5
The Snapper 3011X5 is a riding lawn mower produced from 1985 to 1986 as part of the 5 Series. It features an 11 hp 1-cylinder air-cooled vertical-shaft V-Twin gasoline engine with electric start. The mower uses a 5-speed friction disc transmission with 5 forward and 1 reverse gear. It has two-wheel drive and manual steering with an open operator station. The mower is equipped with a mid PTO (independent) with a manual clutch and pulley type mid PTO. Tires are lawn/turf style with sizes 10.5x4.1-4 front and 16x6.5-8 rear. Electrical system is 12 volts with negative ground. Attachments include a 30" mid-mount mower deck with 7 cut positions and a 36" front-mount blade with manual lift and angle. The mower was built in McDonough, Georgia, USA.
Power-
Founded-
Model3011X5
Technical Specifications
Detailed specifications and technical data for Snapper 3011X5
Power
| Clutch | manual |
|---|---|
| PTO type | independent |
| Mid PTO Type | pulley |
| Power Take-off (PTO) | Mid PTO |
Engine
| Type | gasoline |
|---|---|
| Cooling | air-cooled vertical-shaft V-Twin |
| Starter | electric |
| Cylinders | 1-cylinder |
| Power (gross) | 11 hp (8.2 kW) |
| Starter volts | 12 |
Dimensions
| Rear tire | 16x6.5-8 |
|---|---|
| Front tire | 10.5x4.1-4 |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Production
| Type | Riding lawn mower |
|---|---|
| Series | 5 Series |
| Built in | McDonough, Georgia, USA |
| Years produced | 1985 - 1986 |
Attachments
| Blade | 36 inches (91 cm) width, Snapper front-mount, manual-lift, manual-angle |
|---|---|
| 30" mid-mount mower deck | 30 inches (76 cm) cutting width, mid-mount Snapper, 1-blade with manual lift, belt drive, cut height 1 to 4 inch (2 to 10 cm), 7 cut positions |
Transmission
| Type | friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |