Snapper NXT 2752
The Snapper NXT 2752 is a lawn tractor produced from 2010 to 2011 as part of the NXT Series. It features a 27 hp Briggs & Stratton 724cc 2-cylinder gasoline engine with a 3.5 gallon fuel tank. The tractor uses a Tuff Torq K46 belt-driven hydrostatic transmission with infinite forward and reverse gears. It has two-wheel drive with manual steering and an independent front PTO with electric clutch. Dimensions include a 50 inch wheelbase, 71 inch length, 65 inch width, and 45 inch height. Tires are 15x6 front and 22x9.5-12 rear. Electrical system has a 12 volt battery with 230 CCA and negative ground. Attachments available include a 52 inch mid-mount mower deck with electric lift, a 42 inch front-mount blade, and a 42 inch front-mount snow blower.
Power-
Founded-
ModelNXT 2752
Technical Specifications
Detailed specifications and technical data for Snapper NXT 2752
Tires
| Rear tire | 22x9.5-12 |
|---|---|
| Front tire | 15x6 |
Engine
| Type | gasoline |
|---|---|
| Model | Briggs & Stratton 44Q777 |
| Cooling | air-cooled vertical shaft V-Twin |
| Starter | electric push button |
| Cylinders | 2-cylinder |
| Fuel tank | 3.5 gal (13.2 L) |
| Bore/Stroke | 3.12x2.89 inches (79 x 73 mm) |
| Displacement | 724 cc (44.18 ci) |
| Power (gross) | 27 hp (20.1 kW) |
| Starter volts | 12 |
Dimensions
| Width | 65 inches (165 cm) |
|---|---|
| Height | 45 inches (114 cm) |
| Length | 71 inches (180 cm) |
| Wheelbase | 50 inches (127 cm) |
| Front axle | Cast iron |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 230 |
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | manual |
Production
| Series | NXT Series |
|---|---|
| Category | Lawn tractor |
| Original price | $2,999 in 2011 |
| Years produced | 2010 - 2011 |
Attachments
| 42" Blade | Snapper, front-mount, 42 inches width (106 cm) |
|---|---|
| 42" Snow blower | Snapper, front-mount, 42 inches width (106 cm) |
| 52" mid-mount mower deck | mid-mount Snapper, 3-blade with electric lift, Cutting width 52 inches (132 cm), Cut height 1.5 to 4 inch (3 to 10 cm), Cut positions infinite |
Transmission
| Type | belt-driven hydrostatic |
|---|---|
| Gears | infinite forward and reverse |
| Model | Tuff Torq K46 |
Power Take-off (PTO)
| Clutch | electric |
|---|---|
| Front PTO | independent |
