Snapper lawn tractors
Snapper SPX 2042
The Snapper SPX 2042 is a lawn tractor produced from 2012 to 2013 as part of the SPX Series by Snapper, a part of Briggs & Stratton. It features a 20 hp Briggs & Stratton 540cc 1-cylinder gasoline engine with an electric starter and a 3.5 gallon fuel tank. The tractor uses a Hydro-Gear T2 belt-driven hydrostatic transmission with infinite forward and reverse speeds. It has two-wheel drive with manual steering and an open operator station. The front PTO is independent with an electric clutch. Dimensions include a 50 inch wheelbase, 71 inch length, 52 inch width, and 45 inch height with cast iron front axle. Tires are sized 15x6-6 front and 20x8.0-8 rear. Attachments include a 42 inch mid-mount mower deck with 2 blades, manual lift, 7 cut positions, and cut height from 1.5 to 4 inches. Electrical system has negative ground, 230 CCA battery, and 12 volts.
Power-
Founded-
ModelSPX 2042
Technical Specifications
Detailed specifications and technical data for Snapper SPX 2042
Tires
| Rear tire | 20x8.0-8 |
|---|---|
| Front tire | 15x6-6 |
Engine
| Type | gasoline |
|---|---|
| Model | Briggs & Stratton 33M677 |
| Cooling | air-cooled vertical-shaft |
| Starter | electric |
| Cylinders | 1-cylinder |
| Fuel tank | 3.5 gal (13.2 L) |
| Bore/Stroke | 3.70x3.06 inches (94 x 78 mm) |
| Displacement | 540 cc (33 ci) |
| Power (gross) | 20 hp (14.9 kW) |
| Starter volts | 12 |
Dimensions
| Width | 52 inches (132 cm) |
|---|---|
| Height | 45 inches (114 cm) |
| Length | 71 inches (180 cm) |
| Wheelbase | 50 inches (127 cm) |
| Front axle | Cast iron |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 230 |
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | manual |
| Operator station | Open operator station |
Production
| Type | Lawn tractor |
|---|---|
| Series | SPX Series |
| Original price | $1,799 in 2012 |
| Years produced | 2012 - 2013 |
Attachments
| 42" mid-mount mower deck | 42" mid-mount mower deck |
|---|
Transmission
| Type | belt-driven hydrostatic |
|---|---|
| Gears | infinite forward and reverse |
| Model | Hydro-Gear T2 |
Attachments details
| Type | mid-mount Snapper |
|---|---|
| Blades | 2-blade with manual lift |
| Cut height | 1.5 to 4 inch (3 to 10 cm) |
| Cut positions | 7 |
| Cutting width | 42 inches (106 cm) |
Power Take-off (PTO)
| Clutch | electric |
|---|---|
| Front PTO | independent |