Snapper YT2144
The Snapper YT2144 is a lawn tractor produced from 2006 to 2008 as part of the YT 400 Series. It features a 21 hp Vanguard 2-cylinder air-cooled vertical-shaft V-Twin gasoline engine with a 4-gallon fuel tank. The tractor uses a Tuff Torq K66 belt-driven hydrostatic transmission with infinite forward and reverse gears. It has two-wheel drive, manual steering, and an open operator station. Dimensions include a 53-inch wheelbase, 75 inches length, 39 inches width, and 47 inches height. Tires are sized 16x6.50-8 front and 23x10.50-12 rear. Attachments available include a 44-inch mid-mount mower deck, 42-inch blade, and 42- and 46-inch snow blowers. Electrical system is 12 volts with negative ground.
Power-
Founded-
ModelYT2144
Technical Specifications
Detailed specifications and technical data for Snapper YT2144
Tires
| Rear tire | 23x10.50-12 |
|---|---|
| Front tire | 16x6.50-8 |
Engine
| Type | gasoline |
|---|---|
| Model | Vanguard |
| Starter | electric |
| Cylinders | 2-cylinder |
| Fuel tank | 4 gal (15.1 L) |
| Configuration | air-cooled vertical-shaft V-Twin |
| Power (gross) | 21 hp (15.7 kW) |
| Starter volts | 12 |
Dimensions
| Width | 39 inches (99 cm) |
|---|---|
| Height | 47 inches (119 cm) |
| Length | 75 inches (190 cm) |
| Wheelbase | 53 inches (134 cm) |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Lawn tractor |
|---|---|
| Series | YT 400 Series |
| Original price | $4,800 in 2006 |
| Years produced | 2006 - 2008 |
Attachments
| 42" Blade | Snapper 1693754, front-mount, 42 inches width (106 cm), manual-lift, manual-angle |
|---|---|
| 42" Snow blower | Simplicity 1695360, 42 inches width (106 cm), two-stage, front-mount, manual-lift |
| 46" Snow blower | Simplicity 1694296, 46 inches width (116 cm), single-stage, front-mount, manual-lift |
| 44" mid-mount mower deck | mid-mount Snapper 1694685, 3-blade with manual lift, Cutting width 44 inches (111 cm), Cut height 1.5 to 4 inch (3 to 10 cm) |
Transmission
| Type | belt-driven hydrostatic |
|---|---|
| Gears | infinite forward and reverse |
| Model | Tuff Torq K66 |
Power Take-off (PTO)
| Clutch | electric |
|---|---|
| Mid PTO | independent |
| Mid PTO Type | pulley |
