AGCO

AGCO DT160

The AGCO DT160 is a row-crop tractor produced from 2002 to 2004, part of the DT Series built in Beauvais, France. It features a Cummins 8.3L 6-cylinder turbocharged diesel engine delivering 160 hp claimed PTO power, with tested drawbar and PTO power of 142.58 hp and 164.38 hp respectively. The tractor has an 18-speed full power shift transmission with electro-hydraulic wet disc clutch, four-wheel drive, power steering, and hydraulic wet disc brakes. It includes a closed center pressure flow compensated hydraulic system with 2900 psi pressure and 29 gpm pump flow, with an optional 39 gpm pump. The rear hitch is a 3/3N type with a 16,000 lbs lift capacity. Dimensions include a 121 inch wheelbase, 203 inch length, 98.2 inch minimum width, and 18,500 lbs shipping weight. Electrical system is 12 volts with negative ground and alternator charging. Attachments include the FL600 front-end loader with detailed lift, breakout, reach, and timing specifications.
Power177 hp[P]
Founded2002 - 2004
ModelDT160

Technical Specifications

Detailed specifications and technical data for AGCO DT160

Power
PTO (tested)164.38 hp (122.6 kW)
PTO (claimed)160 hp (119.3 kW)
Drawbar (tested)142.58 hp (106.3 kW)
Engine
Typeturbocharged diesel
ModelCummins C8.3L
Torque538 lb-ft (729.5 Nm)
Coolingliquid-cooled
Cylinders6-cylinder
Fuel tank120 gal (454.2 L)
Rated RPM2200
Torque RPM1251
Air cleanertwo paper elements
Bore/Stroke4.488x5.315 inches (114 x 135 mm)
Compression17.3:1
Displacement505 ci (8.3 L)
Starter volts12
Dimensions
Width98.2 inches (249 cm) *Minimum width
Height121 inches (307 cm)
Length203 inches (515 cm)
Wheelbase121 inches (307 cm)
Shipping weight18,500 lbs (8391 kg)
Electrical
Groundnegative
Battery volts12
Charging systemalternator
Hydraulics
Typeclosed center pressure flow compensated (PFC)
Valves4
Pressure2900 psi (200.0 bar)
Pump flow29 gpm (109.8 lpm)
Optional pump flow39 gpm (147.6 lpm)
Mechanical
Cabstandard
DriveFour-wheel drive
BrakesHydraulic wet disc brakes
SteeringPower steering
Production
TypeRow-Crop tractor
SeriesDT Series
Built inBeauvais, France
Years produced2002 - 2004
Attachments
Dump time2.7s
Dump angle47°
Lower time4.4s
Raise time6.1s
Bucket width96 inches (243 cm)
Rollback time2.2s
Reach (dumped)26 inches (66 cm)
Reach (ground)103 inches (261 cm)
Rollback angle38°
Height (at pin)181 inches (459 cm)
front-end loaderFL600 Loader
Clearance (dumped)152 inches (386 cm)
Breakout force (bucket)6952 lbs (3153 kg)
Lift capacity (full at pin)7641 lbs (3465 kg)
Transmission
Typefull power shift
Gears18 forward and 6 reverse
Clutchelectro-hydraulic wet disc
Tractor hitch
Rear Type3/3N
Rear lift (at 24"/610mm)16,000 lbs (7257 kg)
Power Take-off (PTO)
Rear PTOindependent
Rear PTO Type540/1000