Tractorpedia.com

AGCO DT180

The AGCO DT180 is a row-crop tractor produced from 2002 to 2004, part of the DT Series. It is built in Beauvais, France. It features a Cummins 8.3L 6-cylinder turbocharged aftercooled diesel engine producing 215 hp (160.3 kW). The tractor has an 18-speed full power shift transmission with 6 reverse gears and an electro-hydraulic wet disc clutch. It includes four-wheel drive, power steering, hydraulic wet disc brakes, and a standard cab. The hydraulic system is a closed center pressure flow compensated type with 4 valves and a pump flow of 29 gpm (optional 39 gpm). The rear hitch is a 3/3N type with a lift capacity of 18,000 lbs at 24 inches. The rear PTO is independent and runs at 1000 rpm. Dimensions include a 121 inch wheelbase, 203 inch length, 98.2 inch width, and 121 inch height, with a shipping weight of 18,500 lbs. The tractor uses a 12 volt electrical system with negative ground and alternator charging. Attachments include a front-end loader (FL600) with a lift capacity of 7641 lbs and breakout force of 6952 lbs. The DT180 is related to models DT180A, DT160, DT200, and 9765.
AGCO DT180tractorspecificationsenginetransmissionpowerhydraulicsdimensionsattachmentsfarm tractor
Power215 hp
Founded2002 - 2004
ModelDT180

Technical Specifications

Detailed specifications and technical data for AGCO DT180

Power

Engine:215 hp (160.3 kW)
PTO (tested):184.29 hp (137.4 kW)
PTO (claimed):180 hp (134.2 kW)
Drawbar (tested):160.22 hp (119.5 kW)

Engine

Type:turbocharged aftercooled diesel
Model:Cummins C8.3L
Power:215 hp (160.3 kW)
Torque:633 lb-ft (858.3 Nm)
Cooling:liquid-cooled
Cylinders:6-cylinder
Fuel tank:120 gal (454.2 L)
Rated RPM:2200
Torque RPM:1300
Air cleaner:two paper elements
Bore/Stroke:4.488x5.315 inches (114 x 135 mm)
Compression:17.3:1
Displacement:505 ci (8.3 L)
Starter volts:12

Dimensions

Width:98.2 inches (249 cm)
Height:121 inches (307 cm)
Length:203 inches (515 cm)
Wheelbase:121 inches (307 cm)
Shipping weight:18,500 lbs (8391 kg)

Electrical

Ground:negative
Battery volts:12
Charging system:alternator

Hydraulics

Type:closed center pressure flow compensated (PFC)
Valves:4
Pressure:2900 psi (200.0 bar)
Pump flow:29 gpm (109.8 lpm)
Optional pump flow:39 gpm (147.6 lpm)

Mechanical

Cab:standard
Drive:Four-wheel drive
Brakes:Hydraulic wet disc brakes
Steering:Power steering

Production

Type:Row-Crop tractor
Series:DT Series
Built in:Beauvais, France
Years made:2002 - 2004

Attachments

front-end loader:standard

Transmission

Type:full power shift
Gears:18 forward and 6 reverse
Clutch:electro-hydraulic wet disc

Tractor hitch

Rear Type:3/3N
Rear lift (at 24"/610mm):18,000 lbs (8164 kg)

Serial Numbers

2002:L001001
2003:M001001
2004:N001001

Attachments details

Dump time:2.7s
Dump angle:47°
Lower time:4.4s
Raise time:6.1s
Bucket width:96 inches (243 cm)
Loader model:FL600 Loader
Rollback time:2.2s
Reach (dumped):26 inches (66 cm)
Reach (ground):103 inches (261 cm)
Rollback angle:38°
Height (at pin):181 inches (459 cm)
Clearance (dumped):152 inches (386 cm)
Breakout force (bucket):6952 lbs (3153 kg)
Lift capacity (full at pin):7641 lbs (3465 kg)

Power Take-off (PTO)

Rear PTO:independent
Rear PTO Type:1000

Related Models

AGCO DT180A

Model:DT180A

AGCO DT160

Model:DT160

AGCO DT200

Model:DT200

AGCO 9765

Model:9765