AGCO
AGCO DT225B
The AGCO DT225B is a row-crop tractor produced from 2009 to 2010 by AGCO in Beauvais, France. It is part of the DT-B Series and is essentially the same as the Massey Ferguson 8660. It features a 265 hp AGCO SISU POWER 8.4L 6-cylinder turbocharged intercooled diesel engine with SCR emission control and optional EGR. The tractor has a PowerMaxx CVT continuously variable transmission with infinite forward and reverse gears. It includes four-wheel drive, inboard planetary final drives, full locking electro-hydraulic differential locks front and rear, hydraulic wet disc brakes, and a standard cab with heat and air-conditioning. The hydraulic system is closed center load sensing with up to 6 valves and a total flow of 46.2 gpm. The tractor hitch supports category 3 and optional category 4 configurations with substantial lift capacities. PTO options include independent rear PTO with electro-hydraulic clutch and optional front PTO. Dimensions include a 122.2 inch wheelbase, 215.7 inch length, and 141 inch cab height, with a shipping weight of 24,250 lbs. The tractor supports a variety of tire options and attachments including the FL85 front-end loader with a lift capacity of over 5,000 lbs.
Power265 hp
Founded2009 - 2010
ModelDT225B
Technical Specifications
Detailed specifications and technical data for AGCO DT225B
Power
| Engine power | 265 hp (197.6 kW) |
|---|---|
| PTO (tested) | 269.4 hp (200.9 kW) |
| PTO (claimed) | 225 hp (167.8 kW) |
| Drawbar (tested) | 195.1 hp (145.5 kW) |
Tires
| Optional tires (ag) | Front: 420/85R30, Rear: 520/85R42; Front: 420/90R30, Rear: 520/85R42; Front: 380/85R34, Rear: 520/85R42; Front: 380/85R34, Rear: 480/85R46; Front: 420/85R34, Rear: 520/85R46; Front: 480/70R34, Rear: 520/85R46; Front: 420/85R34, Rear: 480/80R50; Front: 480/70R34, Rear: 480/80R50; Front: 320/85R38, Rear: 320/90R54 |
|---|---|
| Standard tires (ag) | Front: 420/90R30, Rear: 480/80R46 |
Engine
| Type | turbocharged intercooled diesel |
|---|---|
| Model | AGCO SISU POWER 84CTA |
| Power | 265 hp (197.6 kW) |
| Torque | 955 lb-ft (1295.0 Nm) |
| Cooling | liquid-cooled |
| Starter | electric |
| Cylinders | 6-cylinder |
| Emissions | Tier III |
| Fuel tank | 155.9 gal (590.1 L), 182.3 gal (690.0 L) without DEF |
| Rated RPM | 2200 |
| Torque RPM | 1500 |
| Bore/Stroke | 4.37x5.71 inches (111 x 145 mm) |
| Compression | 16.7:1 |
| Fuel system | high-pressure common rail |
| Pre-heating | thermostart |
| Displacement | 512.6 ci (8.4 L) |
| Maximum Power | 295 hp (220.0 kW) |
| Starter volts | 12 |
| Emission control | selective catalytic reduction (SCR), exhaust gas recirculation optional (EGR) |
| Exhaust fluid (DEF) | 7.9 gal (29.9 L) |
Dimensions
| Length | 215.7 inches (547 cm) |
|---|---|
| Wheelbase | 122.2 inches (310 cm) |
| Front axle | Suspension optional |
| Max weight | 38890 lbs (17640 kg) |
| Rear tread | 58.5 to 119.5 inches (148 to 303 cm) |
| Height (cab) | 141 inches (358 cm) |
| Bar rear axle | 4.33 by 118 inches (109 by 2997 mm), 4.33 by 105 inches (109 by 2667 mm) (short axle) |
| Shipping weight | 24250 lbs (10999 kg) |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
| Charging amps | 240 |
| Charging system | alternator |
Hydraulics
| Type | closed center load sensing |
|---|---|
| Valves | 4 to 6 |
| Pressure | 2,901 psi (200.0 bar) |
| SCV flow | 26.4 gpm (99.9 lpm) |
| Total flow | 46.2 gpm (174.9 lpm) |
Mechanical
| Cab | standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. ISOBUS 11783 compatible. Auto-Guide optional. |
|---|---|
| Drive | Four-wheel drive |
| Brakes | Hydraulic wet disc brakes |
| Final drives | inboard planetary |
| Power steering | yes |
| Differential lock | full locking electro-hydraulic front and rear |
Production
| Type | Row-Crop tractor |
|---|---|
| Notes | The AGCO DT225B is the same as a Massey Ferguson 8660. |
| Series | DT-B Series |
| Built in | Beauvais, France |
| Original price | $196,119 in 2009 |
| Years produced | 2009 - 2010 |
Attachments
| Loader | FL85 Loader |
|---|---|
| Dump angle | 54° |
| Height at pin | 148 inches (375 cm) |
| Breakout force | 7,319 lbs (3319 kg) |
| Rollback angle | 40° |
| Lift capacity full at pin | 5,335 lbs (2419 kg) |
| Lift capacity full at 800mm | 4,696 lbs (2130 kg) |
Transmission
| Type | continuously variable transmission |
|---|---|
| Gears | infinite forward and reverse |
| Model | PowerMaxx CVT |
Tractor hitch
| Drawbar | Category 3 (optional Category 3 Heavy Duty, optional Category 4) |
|---|---|
| Rear Type | 3 (optional 4, optional Category 4) |
| Front Hitch | 3 |
| Rear lift (at ends) | 26,460 lbs (12002 kg) |
| Front lift (at ends) | 11,020 lbs (4998 kg) |
| Rear lift (at 24"/610mm) | 21,336 lbs (9678 kg) |
Power Take-off (PTO)
| Clutch | electro-hydraulic |
|---|---|
| Rear PTO | independent |
| Front PTO | optional |
| Engine RPM | 1000@1970, 1000E@1605 |
| Rear PTO Type | 1000E/1000 (1.75) |
| Front PTO Type | 1000 |