Allis Chalmers industrial tractors
Allis Chalmers 615
The Allis Chalmers 615 is an industrial tractor produced from 1966 to 1974 by Allis Chalmers in Topeka, Kansas, USA. It features multiple engine options including gasoline and diesel 4-cylinder liquid-cooled engines with power ranging from 44 hp to 57 hp. The tractor offers 4-speed power shuttle or gear transmissions, two-wheel drive, power steering, and mechanical drum brakes. It has an open operator station and supports various hydraulic flows for three-point hitch, loader, and backhoe-loader applications. The 615 also includes optional rear hitch types and PTO options of 540 and 1000 rpm. Dimensions include an 87-inch wheelbase, weights from 4400 to 4550 lbs depending on fuel type, and specific tire sizes. Electrical system uses a 12-volt battery with a generator charging system. Attachments include a front-end loader with detailed lift and reach specifications.
Power-
Founded-
Model615
Technical Specifications
Detailed specifications and technical data for Allis Chalmers 615
Power
| Engine power | 57 hp (42.5 kW) |
|---|
Engine
| Fuel tank | 16 gal (60.6 L) |
|---|---|
| Engine options | Allis-Chalmers 2.6L 4-cyl gasoline, Allis-Chalmers 2.9L 4-cyl diesel, Allis-Chalmers 3.3L 4-cyl diesel |
| Allis-Chalmers 2.9L diesel | 4-cylinder, liquid-cooled, 175 ci (2.9 L), Bore/Stroke 3.5625x4.375 inches (90 x 111 mm), Power 44 hp (32.8 kW), Compression 15.5:1, Rated RPM 2000 |
| Allis-Chalmers 2.6L gasoline | 4-cylinder, liquid-cooled, 160 ci (2.6 L), Bore/Stroke 3.625x3.625 inches (92 x 92 mm), Power 56.8 hp (42.4 kW), Compression 8:1, Rated RPM 2000, Torque 154 lb-ft (208.8 Nm), Torque RPM 1624, Starter volts 12, Oil capacity 4 qts (3.8 L), Coolant capacity 10 qts (9.5 L), Sparkplug ACDelco C-45 / Champion J-7 / Auto-Lite A-5, Sparkplug gap 0.023 inches (0.584 mm), Point gap 0.022 inches (0.559 mm), Intake valve clearance 0.009 inches (hot) (0.229 mm), Exhaust valve clearance 0.015 inches (cold) (0.381 mm) |
| Allis-Chalmers 3.3L diesel (D2200) | 4-cylinder, liquid-cooled, 200 ci (3.3 L), Bore/Stroke 3.875x4.125 inches (98 x 105 mm), Power 57 hp (42.5 kW), Compression 16.25:1, Rated RPM 2000, Idle RPM 650-2200, Torque 153 lb-ft (207.5 Nm), Torque RPM 1750, Firing order 1-2-3-4, Starter volts 12, Oil capacity 9 qts (8.5 L), Coolant capacity 13.5 qts (12.8 L), Intake valve clearance 0.015 inches (hot) (0.381 mm), Exhaust valve clearance 0.015 inches (hot) (0.381 mm) |
Height
| Hood | 56.875 inches (144 cm) |
|---|---|
| Exhaust | 79 inches (200 cm) |
| Steering wheel | 63 inches (160 cm) |
Variants
| 615 | industrial |
|---|---|
| 615TLB | backhoe-loader |
Electrical
| Gas Ground | positive |
|---|---|
| Battery volts | 12 |
| Diesel Ground | negative |
| Charging system | generator |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 2250 psi (155.1 bar) |
| Pump flow | 4.4 gpm (three point) (16.7 lpm), 15.5 gpm (loader) (58.7 lpm), 24 gpm (backhoe-loader) (90.8 lpm) |
| Steering flow | 4.75 gpm (gas) (18.0 lpm), 5.25 gpm (diesel) (19.9 lpm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Mechanical drum brakes |
| Final drives | bull gear |
| Power steering | Yes |
| Operator station | Open operator station |
Production
| Type | Industrial tractor |
|---|---|
| Built in | Topeka, Kansas, USA |
| Manufacturer | Allis Chalmers |
| Years produced | 1966 - 1974 |
Attachments
| front-end loader | 3300 lbs lift (full at pin) (1496 kg), 6200 lbs breakout (at pin) (2812 kg), 34 inches reach (dumped) (86 cm), 70 inches reach (ground) (177 cm), 25° rollback (ground line), 127 inches height (at pin) (322 cm), 103 inches clearance (dumped) (261 cm), raise: 5.0s, dump: 2.5s, lower: 2.5s |
|---|
Transmission
| Gear | Type gear, Gears 4 forward and 1 reverse, Clutch dry disc |
|---|---|
| Power shuttle | Type power shuttle, Gears 4 forward and reverse, Clutch wet disc (shuttle), dry disc (engine) |
| Transmission options | 4-speed power shuttle, 4-speed gear |
Tractor hitch
| Rear Type | I (Optional) |
|---|
615 Serial Numbers
| Location | Serial number engraved into the left side of the tractor, on the flange where the clutch and engine meet. |
|---|
Dimensions & Tires
| Length | 126 inches (320 cm) |
|---|---|
| Wheelbase | 87 inches (220 cm) |
| Gas Weight | 4400 lbs (1995 kg) |
| Rear tread | 61.875/72.125 inches (157/183 cm) |
| Front tread | 51/54.375 inches (129/138 cm) |
| Ag rear tires | 16.9x24 |
| Diesel Weight | 4550 lbs (2063 kg) |
| Ag front tires | 7.50x16 |
Power Take-off (PTO)
| Rear PTO Type | 540, 1000 |
|---|
More Allis Chalmers industrial tractors models
View all Allis Chalmers industrial tractors modelsAllis Chalmers 190 BeachmasterModel190 Beachmaster
Allis Chalmers 540Model540
Allis Chalmers 545Model545
Allis Chalmers 545BModel545B
Allis Chalmers 605BModel605B
Allis Chalmers 640Model640
Allis Chalmers 644Model644
Allis Chalmers 645Model645
Allis Chalmers 645BModel645B
Allis Chalmers 650Model650
Allis Chalmers 710CModel710C
Allis Chalmers 714BModel714B