Tractorpedia.com

Allis Chalmers 710C

Allis Chalmers 710C tractor
View Images
The Allis Chalmers 710C is an industrial tractor produced from 1982 to 1984 as part of the 700C Series. It features a 65 hp turbocharged 4-cylinder diesel engine, a 4-speed torque converter transmission by Warner, and two-wheel drive with inboard planetary final drives. The tractor includes power steering, mechanical wet disc brakes, and a four-post ROPS/FOPS for operator safety. It has a 20-gallon fuel capacity and a 27-gallon hydraulic system with an open center type and multiple flow rates for loader and auxiliary functions. The rear PTO is independent with hydraulic clutch and operates at 540 RPM at 2100 engine RPM. Dimensions include an 84-inch wheelbase, 83-inch width, and 99-inch height with ROPS. Tires are 11L-16 front and 16.9-24 rear. Electrical system features a 12-volt negative ground with alternator charging and optional battery configurations. The 700C Loader attachment offers a lift capacity of 4700 lbs and breakout force of 7500 lbs with various operational angles and times.
Allis Chalmers 710Cindustrial tractor65 hp4-cylinder dieseltorque converter transmission700C Seriesloader attachment
Power-
Founded-
Model710C

Technical Specifications

Detailed specifications and technical data for Allis Chalmers 710C

Power

Engine:65 hp (48.5 kW)
PTO (claimed):25 hp (18.6 kW)

Engine

Type:turbocharged diesel
Model:Allis-Chalmers 433T
Power:65 hp (48.5 kW)
Cooling:liquid-cooled inline
Starter:electric
Idle RPM:775-2580
Cylinders:4-cylinder
Rated RPM:2300
Bore/Stroke:3.875x4.25 inches (98 x 108 mm)
Compression:14.1:1
Fuel system:direct injection
Displacement:200 ci (3.3 L)
Firing order:1-3-4-2
Oil capacity:12 qts (11.4 L)
Starter volts:12
Coolant capacity:16 qts (15.1 L)
Oil change interval:100 h

Capacity

Fuel:20 gal (75.7 L)
Hydraulic system:27 gal (102.2 L)

Electrical

Ground:negative
Batteries:1 (2 Optional)
Battery CCA:95
Battery Group:30H
Battery volts:12
Charging amps:42 (61 Optional)
Charging system:alternator

Hydraulics

Type:open center
Capacity:27 gal (102.2 L)
Total flow:29 gpm (109.8 lpm)
Rear valves:2
Pump flow aux:11 gpm (41.6 lpm)
Steering flow:5 gpm (18.9 lpm)
Pump flow loader:18 gpm (68.1 lpm)
Steering pressure:1500 psi (103.4 bar)

Mechanical

Drive:Two-wheel drive
Brakes:Mechanical wet disc brakes
ROPS/FOPS:Four-post ROPS/FOPS
Final drives:inboard planetary
Power steering:Yes

Production

Type:Industrial tractor
Series:700C Series
Manufacturer:Allis Chalmers
Years produced:1982 - 1984

Attachments

Loader:700C Loader
Boom rod:1.75 inches (4 cm)
Dump time:2s
Bucket rod:1.50 inches (3 cm)
Dump angle:45°
Lower time:3s
Raise time:5s
Boom cylinder:3.25 inches (8 cm)
Rollback time:2s
Breakout force:7500 lbs (3402 kg)
Reach (dumped):30 inches (76 cm)
Bucket cylinder:2.50 inches (6 cm)
Height (at pin):125 inches (317 cm)
Clearance (dumped):104 inches (264 cm)
Rollback (ground line):40°
Lift capacity (full at pin):4700 lbs (2131 kg)

Transmission

Type:torque converter
Gears:4 forward and reverse
Manufacturer:Warner

Tractor hitch

Rear Type:II

Serial Numbers

Location:Serial number plate on the left side of the 710C, just behind the engine.

Dimensions & Tires

Width:83 inches (210 cm)
Rear tire:16.9-24
Wheelbase:84 inches (213 cm)
Front tire:11L-16
Rear tread:65 inches (165 cm)
Front tread:67 inches (170 cm)
Height (ROPS):99 inches (251 cm)
Ground clearance:13.25 inches (33 cm)

Power Take-off (PTO)

Clutch:hydraulic
Rear PTO:independent
Engine RPM:540@2100
Rear PTO Type:540 (1.375)