Allis Chalmers C
The Allis Chalmers C is a row-crop tractor produced from 1940 to 1949 by Allis Chalmers in West Allis, Wisconsin, USA. It features a 2.1L 4-cylinder engine available in distillate and gasoline versions, with estimated engine power of 21.6 hp. The tractor has a 3-speed non-synchronized transmission, two-wheel drive, manual steering, and mechanical drum brakes. It was designed for agricultural use with a plow capacity of 2 and tested drawbar power of 18.4 hp and PTO power of 23.3 hp. The tractor weighs 2500 lbs and has a wheelbase of 77 inches. It includes a rear PTO transmission type 560 and uses positive ground electrical system with a 6-volt battery.
Power21 hp[P]
Founded1940 - 1949
ModelC
Technical Specifications
Detailed specifications and technical data for Allis Chalmers C
Power
| Plows | 2 |
|---|---|
| PTO (tested) | 23.30 hp (17.4 kW) |
| Drawbar (tested) | 18.4 hp (13.7 kW) |
Tires
| Ag rear | 9-24, 10-24 |
|---|---|
| Ag front | 4.00-15, 6-12 |
Engine
| Point gap | 0.020 inches (0.508 mm) |
|---|---|
| Rated RPM | 1500 |
| Sparkplug | Autolite A 9, AC 47 |
| Air cleaner | oil bath |
| Bore/Stroke | 3.375x3.50 inches (86 x 89 mm) |
| Compression | 4.75:1 |
| Displacement | 125.2 ci (2.1 L) |
| Firing order | 1-2-4-3 |
| Oil capacity | 4 qts (3.8 L) |
| Sparkplug gap | 0.035 inches (0.889 mm) |
| Starter volts | 6 |
| Engine options | Allis Chalmers 2.1L 4-cyl distillate, Allis-Chalmers 2.1L 4-cyl gasoline |
| Coolant capacity | 8 qts (7.6 L) |
| Point gap (gasoline) | 0.020 inches (0.508 mm) |
| Sparkplug (gasoline) | Autolite AN 7, AC 45 |
| Compression (gasoline) | 5.75:1 |
| Intake valve clearance | 0.010 inches (hot) (0.254 mm) |
| Exhaust valve clearance | 0.010 inches (hot) (0.254 mm) |
| Sparkplug gap (gasoline) | 0.035 inches (0.889 mm) |
| Allis-Chalmers CE gasoline | 4-cylinder 8-valve, liquid-cooled |
| Allis Chalmers CE distillate | 4-cylinder 8-valve, liquid-cooled vertical I-head, Low-octane fuel engine designed to run on tractor fuels with an octane rating of 30 or higher. |
| Intake valve clearance (gasoline) | 0.010 inches (0.254 mm) |
| Exhaust valve clearance (gasoline) | 0.010 inches (0.254 mm) |
Dimensions
| Width | 68.5 inches (173 cm) |
|---|---|
| Height | 62.75 inches (159 cm) |
| Length | 114 inches (289 cm) |
| Weight | 2500 lbs (1134 kg) |
| Wheelbase | 77 inches (195 cm) |
| Rear tread | 52 to 80 inches (132 to 203 cm) |
| Front tread | 82 inches (208 cm) |
Electrical
| Ground | positive |
|---|---|
| Battery AH | 95 |
| Battery volts | 6 |
| Charging amps | 12 |
| Charging system | generator |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Mechanical drum brakes |
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Row-Crop tractor |
|---|---|
| Built in | West Allis, Wisconsin, USA |
| Total built | 84,020 |
| Manufacturer | Allis Chalmers |
| Original price | $1,200 in 1949 |
| Years produced | 1940 - 1949 |
Belt Pulley
| RPM | 1129 |
|---|---|
| Width | 5.5 inches (13 cm) |
| Diameter | 8 inches (20 cm) |
Transmission
| Type | non-synchronized gear |
|---|---|
| Gears | 3 forward and 1 reverse |
| Oil type | SAE20W |
| Oil capacity | 6 qts (5.7 L), 7 qts (6.6 L) with PTO |
Power Take-off (PTO)
| Rear PTO | transmission |
|---|---|
| Rear PTO Type | 560 |
Related Models
More Allis Chalmers models
View all Allis Chalmers modelsAllis Chalmers 10-18Model10-18
Allis Chalmers 160Model160
Allis Chalmers 170Model170
Allis Chalmers 175Model175
Allis Chalmers 18-30Model18-30
Allis Chalmers 180Model180
Allis Chalmers 185Model185
Allis Chalmers 190Model190
Allis Chalmers 190XTModel190XT
Allis Chalmers 20-35Model20-35
Allis Chalmers 200Model200
Allis Chalmers 210Model210
