Allis Chalmers CA
The Allis Chalmers CA is a row-crop tractor produced from 1950 to 1958 by Allis Chalmers in West Allis, Wisconsin, USA. It features a 2.1L 4-cylinder gasoline engine producing an estimated 25.6 hp, a 4-speed non-synchronized transmission, and two-wheel drive. The tractor has a live rear PTO and an open operator station. It was built in large numbers with 39,499 units produced and originally sold for $1,900 in 1958. The CA is known for its mechanical contracting band brakes and manual steering. It has a wheelbase of 82 inches and weighs 2835 lbs operating weight. The tractor uses 5.00-15 front tires and 10-24 rear tires. The Allis Snap Coupler hitch was available after 1954. The CA is related to the earlier Allis Chalmers C model.
Power25 hp[P]
Founded1950 - 1958
ModelCA
Technical Specifications
Detailed specifications and technical data for Allis Chalmers CA
Power
| Belt (tested) | 25.96 hp (19.4 kW) |
|---|---|
| PTO (claimed) | 23 hp (17.2 kW) |
| Drawbar (tested) | 22.97 hp (17.1 kW) |
| Drawbar (claimed) | 18 hp (13.4 kW) |
Tires
| Ag rear | 10-24 |
|---|---|
| Ag front | 5.00-15 |
Engine
| Type | gasoline |
|---|---|
| Cooling | liquid-cooled vertical I-head |
| Cylinders | 4-cylinder 8-valve |
| Point gap | 0.020 inches (0.508 mm) |
| Rated RPM | 1650 |
| Sparkplugs | AC45, Autolite A-7, Autolite A-9, Champion J-8 |
| Air cleaner | oil bath |
| Bore/Stroke | 3.375x3.50 inches (86 x 89 mm) |
| Displacement | 125.2 ci (2.1 L) |
| Engine model | Allis Chalmers 2.1L 4-cyl gasoline |
| Firing order | 1-2-4-3 |
| Sparkplug gap | 0.030 inches (0.762 mm) |
| Starter volts | 6 |
| Coolant capacity | 9 qts (8.5 L) |
| Compression ratio | 6.25:1 |
| Intake valve clearance | 0.012 inches (hot) (0.305 mm) |
| Exhaust valve clearance | 0.012 inches (hot) (0.305 mm) |
Capacity
| Fuel | 13 gal (49.2 L) |
|---|---|
| Hydraulic system | 2 gal (7.6 L) |
Dimensions
| Height | 73 inches (185 cm) |
|---|---|
| Length | 125 inches (317 cm) |
| Wheelbase | 82 inches (208 cm) |
| Rear tread | 52 to 80 inches (132 to 203 cm) |
| Front tread | 6.25/13 inches (15/33 cm) |
| Ballasted weight | 5045 lbs (2288 kg) |
| Operating weight | 2835 lbs (1285 kg) |
Electrical
| Ground | positive |
|---|---|
| Battery AH | 95 |
| Battery volts | 6 |
| Charging amps | 10 |
| Charging system | generator |
Hydraulics
| Capacity | 2 gal (7.6 L) |
|---|---|
| Pressure | 3200 psi (220.6 bar) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Differential mechanical contracting band brakes |
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Row-Crop tractor |
|---|---|
| Built in | West Allis, Wisconsin, USA |
| Live PTO | due to a hand clutch that "broke" the rear axle, causing the differential to spin freely |
| Total built | 39,499 |
| Original price | $1,900 in 1958 |
| Years produced | 1950 - 1958 |
Belt Pulley
| RPM | 1220 |
|---|---|
| Speed | 2555 ft/min (778.76 meters/min) |
| Width | 5.5 inches (13 cm) |
| Diameter | 8 inches (20 cm) |
Transmission
| Type | non-synchronized |
|---|---|
| Gears | 4 forward and 1 reverse |
| Clutch | dry disc |
| Oil capacity | 4 qts (3.8 L) |
Tractor hitch
| Type | Allis Snap Coupler (Available after 1954) |
|---|
Power Take-off (PTO)
| Rear PTO | live |
|---|---|
| Rear PTO Type | 538 |
Related Models
More Allis Chalmers models
View all Allis Chalmers modelsAllis Chalmers 10-18Model10-18
Allis Chalmers 160Model160
Allis Chalmers 170Model170
Allis Chalmers 175Model175
Allis Chalmers 18-30Model18-30
Allis Chalmers 180Model180
Allis Chalmers 185Model185
Allis Chalmers 190Model190
Allis Chalmers 190XTModel190XT
Allis Chalmers 20-35Model20-35
Allis Chalmers 200Model200
Allis Chalmers 210Model210
