Farmall

Farmall 1026

The Farmall 1026 is a row-crop tractor produced from 1970 to 1971 by Farmall, a part of International Harvester. It was built in Rock Island, Illinois, USA, with a total production of 2,414 units. The tractor features a turbocharged 6.7L 6-cylinder diesel engine producing 127 hp gross and 123 hp net, paired with a hydrostatic transmission offering infinite forward and reverse speeds in two ranges. It has two- or four-wheel drive options, power steering, and differential hydraulic dry disc brakes. The tractor's operating weight is 11,100 lbs and it rides on 11L-15 front tires and 18.4-38 rear tires. The Farmall 1026 supports various attachments including the International Harvester 2000 Loader with a lift capacity of 2,330 lbs and breakout force of 4,010 lbs. It has an open operator station and features an independent rear PTO with speeds of 540 and 1000 RPM. The original price was $11,800 in 1971.
Power127 hp
Founded1970 - 1971
Model1026

Technical Specifications

Detailed specifications and technical data for Farmall 1026

Power
Engine (net)123 hp (91.7 kW)
PTO (tested)112.45 hp (83.9 kW)
PTO (claimed)112 hp (83.5 kW)
Engine (gross)127 hp (94.7 kW)
Drawbar (tested)80.24 hp (59.8 kW)
Engine
Typeturbocharged diesel
ModelInternational Harvester DT-407
Coolingliquid-cooled
Idle RPM900-2400
Cylinders6-cylinder
Fuel tank42 gal (159.0 L)
Rated RPM2400
Air cleanerdual-stage dry
Bore/Stroke4.321x4.625 inches (110 x 117 mm)
Compression16:1
Power (net)123 hp (91.7 kW)
Displacement406.9 ci (6.7 L)
Oil capacity13 qts (12.3 L)
Power (gross)127 hp (94.7 kW)
Starter volts12
Coolant capacity24 qts (22.7 L)
Variants
IH 1026standard
IH 21026industrial
Farmall 1026row-crop
Electrical
Batteries2
Battery AH204
Battery volts6
Charging systemalternator
Hydraulics
Typeopen center
Rear valves1 or 2
Mechanical
DriveTwo- or four-wheel drive
BrakesDifferential hydraulic dry disc brakes
Power steeringYes
Operator stationOpen operator station
Production
TypeRow-Crop tractor
Built inRock Island, Illinois, USA
Years made1970 - 1971
Total built2,414
Original price$11,800 in 1971
Attachments
NotesWith double-acting lift cylinders.
LoaderInternational Harvester 2000 Loader
Weight1417 lbs (642 kg)
Rollback20° rollback
Bucket width48 inches (121 cm), 60 inches (152 cm)
Boom cylinder2.0 inches (5 cm), 2.5 inches (6 cm)
Height at pin127 inches (322 cm)
Lift capacity2330 lbs lift (full at pin) (1056 kg)
Breakout force4010 lbs breakout (1818 kg)
Bucket cylinder2.5 inches (6 cm)
Clearance dumped106 inches (269 cm)
Transmission
Typehydrostatic
Gearsinfinite forward and reverse (2-range)
Oil capacity28 qts (26.5 L)
Tractor hitch
Controlhydraulic draft control
Rear TypeII
Serial Numbers
19707501
19719707
Serial number plate locationon the left side of the hydrostatic housing, ahead of the batteries.
Dimensions & Tires
Length166 inches (421 cm)
Rear tire18.4-38
Wheelbase105 inches (266 cm)
Front tire11L-15
Front tread60 to 84 inches (152 to 213 cm)
Bar rear axle3.25 inch diameter (82 mm)
Ballasted weight14975 lbs (6792 kg)
Operating weight11100 lbs (5034 kg)
Height (steering wheel)86 inches (218 cm)
Power Take-off (PTO)
Clutchhydraulic disc
Speeds540/1000
Rear PTOindependent
Engine RPM540@2100, 1000@2100
Rear PTO Type1000