Tractorpedia.com

Ingersoll 3016

Ingersoll 3016 tractor
View Images
The Ingersoll 3016 is a garden tractor produced from 1989 to 2004 in Winneconne, Wisconsin, USA. It belongs to the 3000 Series and features a 16 hp engine option with either an Onan 709cc or Briggs & Stratton 480cc 2-cylinder gasoline engine. The tractor uses a Hy-Drive hydraulic transmission with infinite forward and reverse speeds in two ranges. It has a wheelbase of 46 inches, weighs 683 lbs, and includes features such as two-wheel drive, manual steering, and an open operator station. The tractor supports various attachments including mid-mount mower decks, snowblower, and blade. It has an open center hydraulic system with 2100 psi transmission pressure and 575 psi lift pressure. Electrical system includes a 12-volt flywheel alternator charging system with 20 amps. The PTO is independent with an electric clutch and pulley type front PTO.
Ingersoll 3016garden tractorlawn tractor16 hp enginehydraulic transmissionmower decksnowblowertractor specifications
Power16 hp
Founded42/44/48" deck
Model3016

Technical Specifications

Detailed specifications and technical data for Ingersoll 3016

Engine

Onan P216:gasoline, 2-cylinder, air-cooled horizontal-shaft horizontally-opposed
Engine options:16HP Onan 709cc 2-cyl gasoline; 16HP Briggs & Stratton 480cc 2-cyl gasoline
Onan P216 details:Displacement 709 cc (43.3 ci), Bore/Stroke 3.25x2.875 inches (83 x 73 mm), Power (gross) 16 hp (11.9 kW), Compression 6.5:1, Rated RPM 3600, Starter electric 12 volts, Sparkplug Champion RS14YC, Sparkplug gap 0.025 inches (0.635 mm), Intake valve clearance 0.005 inches (cold) (0.127 mm), Exhaust valve clearance 0.013 inches (cold) (0.330 mm)
Briggs & Stratton 303777:gasoline, 2-cylinder, air-cooled
Briggs & Stratton 303777 details:Displacement 480 cc (29.3 ci), Bore/Stroke 2.677x2.60 inches (68 x 66 mm), Power (gross) 16 hp (11.9 kW), Rated RPM 3600, Starter electric 12 volts, Sparkplug Champion RC12YC, Sparkplug gap 0.030 inches (0.762 mm)

Dimensions

Width:41 inches (104 cm)
Length:65 inches (165 cm)
Weight:683 lbs (309 kg)
Rear tire:23x10.50-12
Wheelbase:46 inches (116 cm)
Front tire:16.50-8
Rear tread:27.75 inches (70 cm)
Front tread:28.75 inches (73 cm)
Height (hood):35.5 inches (90 cm)
Clearance (rear axle):7.2 inches (18 cm)
Height (steering wheel):40 inches (101 cm)

Electrical

Ground:negative
Battery CCA:300
Battery volts:12
Charging amps:20
Charging volts:12
Charging system:flywheel alternator

Hydraulics

Type:open center
Valves:2
Pressure:2100 psi (transmission) (144.8 bar), 575 psi (lift) (39.6 bar)
Pump flow:8 gpm (30.3 lpm)

Mechanical

Drive:Two-wheel drive
Steering:Manual steering
Operator station:Open operator station

Production

Series:3000 Series
Category:Garden tractor
Years produced:1989 - 2004
Manufactured in:Winneconne, Wisconsin, USA

Attachments

Note:Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.
Blade:44 inches width (111 cm), front-mount, Ingersoll UB44
Snowblower:38 inches width (96 cm), front-mount, Ingersoll SB38
42" mid-mount mower deck:Ingersoll RM42, 42 inches (106 cm), 2-blade, right-discharge
44" mid-mount mower deck:Ingersoll RM44, 44 inches (111 cm), 3-blade, right-discharge
48" mid-mount mower deck:Ingersoll RM48, 48 inches (121 cm), 3-blade, right-discharge

Transmission

Type:hydraulic drive
Gears:infinite forward and reverse (2-range)
Transmission:Hy-Drive

Tractor hitch

Rear Type:0 Optional

Power Take-off (PTO)

Clutch:electric
Front PTO:independent
Front PTO Type:pulley

Serial Number Location

Location:Serial number on the left side of the tractor frame, above the footrest.

Related Models

Ingersoll 3014

Model:3014

Ingersoll 3018

Model:3018