Tractorpedia.com

Ingersoll 3018

Ingersoll 3018 tractor
View Images
The Ingersoll 3018 is a garden tractor produced from 1989 to 2004 as part of the 3000 Series. It was built in Winneconne, Wisconsin, USA. It features an 18 hp engine option from either Onan or Briggs & Stratton, hydraulic Hy-Drive transmission with infinite forward and reverse speeds, and is available with manual or power steering (3018PS variant). The tractor has an open operator station and supports various attachments including mid-mount mower decks, snowblower, and blade. It has a wheelbase of 46 inches and weighs between 683 and 725 pounds depending on the variant.
Ingersoll 3018garden tractorlawn tractorOnan engineBriggs & Stratton enginehydraulic transmissionmower decksnowblowertractor specifications
Power18 hp
Founded42/44/48" deck
Model3018

Technical Specifications

Detailed specifications and technical data for Ingersoll 3018

Engine

Starter:electric
Fuel tank:3 gal (11.4 L)
Rated RPM:3600
Onan P218G:gasoline, 2-cylinder, air-cooled horizontal-shaft horizontally-opposed
Bore/Stroke:3.25x2.88 inches (83 x 73 mm)
Starter B&S:electric
Displacement:781 cc (47.7 ci)
Power (gross):18 hp (13.4 kW)
Rated RPM B&S:3600
Starter volts:12
Engine options:18HP Onan 781cc 2-cyl gasoline; 18HP Briggs & Stratton 569cc 2-cyl gasoline
Bore/Stroke B&S:2.834x2.75 inches (72 x 70 mm)
Displacement B&S:569 cc (34.75 ci)
Power (gross) B&S:18 hp (13.4 kW)
Starter volts B&S:12
Briggs & Stratton 350447:gasoline, 2-cylinder, air-cooled

Steering

3018 Steering:manual
3018PS Steering:power

Variants

3018PS:power steering

Dimensions

Width:41 inches (104 cm)
Length:65 inches (165 cm)
Rear tire:23x10.50-12
Wheelbase:46 inches (116 cm)
Front tire:16.50-8
Rear tread:27.75 inches (70 cm)
3018 Weight:683 lbs (309 kg)
Front tread:28.75 inches (73 cm)
3018PS Weight:725 lbs (328 kg)
Height (hood):35.5 inches (90 cm)
Clearance (rear axle):7.2 inches (18 cm)
Height (steering wheel):40 inches (101 cm)

Electrical

Ground:negative
Battery CCA:300
Battery volts:12
Charging amps:20
Charging volts:12
Charging system:flywheel alternator

Hydraulics

Type:open center
Valves:2
Pressure:2100 psi (transmission) (144.8 bar), 575 psi (lift) (39.6 bar)
3018 Pump flow:8 gpm (30.3 lpm)
3018PS Pump flow:9.5 gpm (36.0 lpm)

Production

Type:Garden tractor
Series:3000 Series
Built in:Winneconne, Wisconsin, USA
Manufacturer:Ingersoll
Years produced:1989 - 2004

Attachments

Note:Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.
Blade:44 inches width (111 cm), front-mount, Ingersoll UB44
Snowblower:38 inches width (96 cm), front-mount, Ingersoll SB38
42" mid-mount mower deck:Ingersoll RM42, 42 inches (106 cm), 2-blade, right-discharge
44" mid-mount mower deck:Ingersoll RM44, 44 inches (111 cm), 3-blade, right-discharge
48" mid-mount mower deck:Ingersoll RM48, 48 inches (121 cm), 3-blade, right-discharge

Transmission

Type:hydraulic drive
Gears:infinite forward and reverse (2-range)
Transmission:Hy-Drive

Tractor hitch

Rear Type:0 Optional

Power Take-off (PTO)

Clutch:electric
Front PTO:independent
Front PTO Type:pulley

Related Models

Ingersoll 3016

Model:3016