Snapper lawn tractors
Snapper 26063
The Snapper 26063 is a riding lawn mower produced from 1979 to 1982 as part of the 3 Series. It features a 6 hp 1-cylinder gasoline engine with a 1.75 gallon fuel tank. The mower uses a 5-speed friction disc transmission with 5 forward and 1 reverse gear. It has two-wheel drive and manual steering with an open operator station. The mower is equipped with a mid PTO pulley type and manual clutch. Tires are lawn/turf style with sizes 10.50x3.50-4 front and 16x4.80-8 rear. Attachments include a 26 inch mid-mount mower deck with a single blade and a 36 inch front-mount blade, both manually lifted and angled. Electrical system is 12 volts with negative ground. The mower was built in McDonough, Georgia, USA.
Power6 hp
Founded26" deck
Model26063
Technical Specifications
Detailed specifications and technical data for Snapper 26063
Engine
| Type | 6HP 1-cyl gasoline |
|---|---|
| Starter | manual recoil, electric Optional |
| Fuel tank | 1.75 gal (6.6 L) |
| Engine detail | gasoline, 1-cylinder, air-cooled vertical-shaft |
| Power (gross) | 6 hp (4.5 kW) |
| Starter volts | 12 |
Dimensions
| Rear tire | 16x4.80-8 |
|---|---|
| Front tire | 10.50x3.50-4 |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station. |
Production
| Type | Riding lawn mower |
|---|---|
| Series | 3 Series |
| Built in | McDonough, Georgia, USA |
| Years produced | 1979 - 1982 |
Attachments
| Blade | 36" Blade, Snapper front-mount, 36 inches width (91 cm), manual-lift, manual-angle |
|---|---|
| 26" mid-mount mower deck | Type: mid-mount Snapper, 1-blade with manual lift, Cutting width: 26 inches (66 cm), Drive: belt |
Transmission
| Type | friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Power Take-off (PTO)
| Clutch | manual |
|---|---|
| PTO type | independent |
| Mid PTO Type | pulley |
| PTO location | Mid PTO |