Snapper lawn tractors
Snapper 26064
The Snapper 26064 is a riding lawn mower from the 4 Series produced by Snapper between 1983 and 1984. It features a 6 hp (4.5 kW) 1-cylinder air-cooled gasoline engine with a 1.75 gallon (6.6 L) fuel tank. The mower uses a 5-speed friction disc transmission with 5 forward and 1 reverse gear. It has two-wheel drive and manual steering with an open operator station. The mower is equipped with a mid PTO with an independent pulley type and manual clutch. Tires are sized 10.5x3.5-4 front and 16x4.80-8 rear. Attachments include a 26" mid-mount mower deck with a single blade and manual lift, and a 36" front-mount blade with manual lift and angle. Electrical system is 12 volts with negative ground. The Snapper 26064 was built in McDonough, Georgia, USA.
Power6 hp
Founded26" deck
Model26064
Technical Specifications
Detailed specifications and technical data for Snapper 26064
Power
| Clutch | manual |
|---|---|
| PTO type | independent |
| Mid PTO Type | pulley |
| Power Take-off (PTO) | Mid PTO |
Engine
| Type | gasoline |
|---|---|
| Cooling | air-cooled vertical-shaft |
| Starter | manual recoil, electric Optional |
| Cylinders | 1-cylinder |
| Fuel tank | 1.75 gal (6.6 L) |
| Power (gross) | 6 hp (4.5 kW) |
| Starter volts | 12 |
Dimensions
| Rear tire | 16x4.80-8 |
|---|---|
| Front tire | 10.5x3.5-4 |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Riding lawn mower |
|---|---|
| Series | 4 Series |
| Built in | McDonough, Georgia, USA |
| Years made | 1983 - 1984 |
Attachments
| Blade | 36" front-mount Snapper, 36 inches width (91 cm), manual-lift, manual-angle |
|---|---|
| 26" mid-mount mower deck | mid-mount Snapper, 1-blade with manual lift, Cutting width 26 inches (66 cm), Drive belt |
Transmission
| Type | friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |