Allis Chalmers D-12
The Allis Chalmers D-12 is an industrial tractor produced from 1959 to 1964 by Allis Chalmers in West Allis, Wisconsin, USA. It features a 2.4L 4-cylinder gasoline engine producing 39 hp net, with a 4-speed sliding gear transmission. The tractor is two-wheel drive with manual steering and drum brakes, and has an open operator station. It includes hydraulics with an open center system, 1500 psi pressure, and 1 or 2 valves. The rear hitch is a Snap-Couple type with a rear PTO operating at 540 RPM at 1650 engine RPM. Dimensions include a 78.75 inch wheelbase, 121 inch length, and a shipping weight of 3200 lbs. Attachments available include the L-102 front-end loader and Allis-Chalmers Mark I and Mark TEN backhoes.
Power-
Founded-
ModelD-12
Technical Specifications
Detailed specifications and technical data for Allis Chalmers D-12
Power
| Engine (net) | 39 hp (29.1 kW) |
|---|---|
| PTO (claimed) | 35.3 hp (26.3 kW) |
| Drawbar (claimed) | 30.6 hp (22.8 kW) |
Tires
| Ag rear | 11.2x24, 12.4x24 |
|---|---|
| Ag front | 5.00x15, 6.00x16 |
Engine
| Type | gasoline, 4-cylinder, liquid-cooled |
|---|---|
| Model | Allis-Chalmers 2.4L 4-cyl gasoline |
| Torque | 137 lb-ft (185.8 Nm) |
| Fuel tank | 12.5 gal (47.3 L) |
| Rated RPM | 1650 |
| Air cleaner | oil bath |
| Bore/Stroke | 3.50x3.875 inches (89 x 98 mm) |
| Compression | 7.5:1 |
| Power (net) | 39 hp (29.1 kW) |
| Displacement | 149 ci (2.4 L) |
| Firing order | 1-2-4-3 |
| Oil capacity | 4.5 qts (4.3 L) |
| Starter volts | 12 |
| Coolant capacity | 8 qts (7.6 L) |
Dimensions
| Length | 121 inches (307 cm) |
|---|---|
| Wheelbase | 78.75 inches (200 cm) |
| Rear tread | 52 to 79.25 inches (132 to 201 cm) |
| Front tread | 49.3 to 80 inches (125 to 203 cm) |
| Height (hood) | 52.5 inches (133 cm) |
| Shipping weight | 3200 lbs (1451 kg) |
| Height (exhaust) | 76.5 inches (194 cm) |
| Clearance (rear axle) | 22 inches (55 cm) |
| Clearance (front axle) | 21.25 inches (53 cm) |
Hydraulics
| Type | open center |
|---|---|
| Valves | 1 or 2 |
| Pressure | 1500 psi (103.4 bar) |
| Pump flow | 3.56 gpm (13.5 lpm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Drum brakes |
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Industrial tractor |
|---|---|
| Built in | West Allis, Wisconsin, USA |
| Years produced | 1959 - 1964 |
Attachments
| Backhoe | [object Object],[object Object] |
|---|---|
| Front-end loader | L-102 Loader: 2000 lbs lift (full at pin) (907 kg), 3200 lbs breakout (1451 kg), 30 inches reach (dumped) (76 cm), 6° rollback, 100 inches clearance (dumped) (254 cm), weight: 1020 lbs (462 kg) (Weight of loader without bucket) |
Belt Pulley
| RPM | 1220 |
|---|---|
| Speed | 2556 ft/min (779.07 meters/min) |
Transmission
| Type | sliding gear |
|---|---|
| Gears | 4 forward and 1 reverse |
| Oil capacity | 4.5 qts (4.3 L) |
Tractor hitch
| Type | Snap-Couple |
|---|---|
| Rear Type | I |
Power Take-off (PTO)
| Engine RPM | 540@1650 |
|---|---|
| Rear PTO Type | 540 |
Related Models
More Allis Chalmers industrial tractors models
View all Allis Chalmers industrial tractors modelsAllis Chalmers 190 BeachmasterModel190 Beachmaster
Allis Chalmers 540Model540
Allis Chalmers 545Model545
Allis Chalmers 545BModel545B
Allis Chalmers 605BModel605B
Allis Chalmers 615Model615
Allis Chalmers 640Model640
Allis Chalmers 644Model644
Allis Chalmers 645Model645
Allis Chalmers 645BModel645B
Allis Chalmers 650Model650
Allis Chalmers 710CModel710C
