Allis Chalmers industrial tractors

Allis Chalmers I60

The Allis Chalmers I60 is an industrial tractor produced from 1965 to 1966 in West Allis, Wisconsin, USA. It features a 56.8 hp engine with gasoline and diesel options, multiple transmission choices including 4-speed gear, 8-speed Power Director, and 4-speed shuttle. The tractor offers two-wheel drive, power steering, mechanical drum brakes, and an open operator station. It supports various attachments such as a front-end loader and backhoe, with detailed specifications for each. The I60 is related to the Allis Chalmers I600 and D-15 models.
Power-
Founded-
ModelI60

Technical Specifications

Detailed specifications and technical data for Allis Chalmers I60

Power
Engine power56.8 hp (42.4 kW)
Tires
Lawn/turf rear12.4x24, 14.9x24
Industrial rear14.9-24, 16.9x24
Industrial front6-16, 7.50-16
Engine
Fuel tank16 gal (60.6 L)
Diesel engine4-cylinder, liquid-cooled, 175 ci (2.9 L), Bore/Stroke 3.5625x4.375 inches (90 x 111 mm), Power 44 hp (32.8 kW), Compression 15.5:1, Rated RPM 2000, Torque 127 lb-ft (172.2 Nm) at 1600 RPM, Starter electric 12 volts, Oil capacity 5 qts (4.7 L), Coolant capacity 12 qts (11.4 L)
Engine optionsAllis-Chalmers 2.6L 4-cyl gasoline, Allis-Chalmers 2.9L 4-cyl diesel
Gasoline engine4-cylinder, liquid-cooled, 160 ci (2.6 L), Bore/Stroke 3.625x3.625 inches (92 x 92 mm), Power 56.8 hp (42.4 kW), Compression 8:1, Rated RPM 2000
Dimensions
Width77 inches (195 cm)
Length126 inches (320 cm)
Weight4550 lbs (2063 kg) tractor, 7025 lbs (3186 kg) tractor-loader, 10180 lbs (4617 kg) backhoe-loader
Wheelbase87 inches (220 cm)
Rear tread62/72 inches (157/182 cm)
Front tread51/54 inches (129/137 cm)
Height (hood)56.9 inches (144 cm)
Ground clearance18 inches (45 cm)
Height (steering wheel)63 inches (160 cm)
Hydraulics
Typeopen center
Pressure2250 psi (155.1 bar)
Pump flow15.5 gpm (58.7 lpm)
Mechanical
DriveTwo-wheel drive
BrakesMechanical drum brakes
SteeringPower steering
Operator stationOpen operator station
Production
TypeIndustrial tractor
Built inWest Allis, Wisconsin, USA
Years produced1965 - 1966
Attachments
Typesfront-end loader, backhoe
Industrial 60 Loader
Weight1335 lbs (605 kg) without bucket
Boom rod1.75 inches (4 cm)
Bucket rod1.5 inches (3 cm)
Dump angle50°
Bucket width67.5 inches (171 cm), 79.5 inches (201 cm)
Boom cylinder2.5 inches (6 cm)
Lift capacity3200 lbs (1451 kg) full at pin
Breakout force6200 lbs (2812 kg)
Reach (dumped)36 inches (91 cm)
Reach (ground)70 inches (177 cm)
Rollback angle25°
Bucket cylinder3.0 inches (7 cm)
Clearance (level)127 inches (322 cm)
Clearance (dumped)103 inches (261 cm)
Allis Chalmers 2780 Backhoe
TypeAllis Chalmers 2780 Backhoe
Swing arc200°
Bucket force8800 lbs (3991 kg)
Digging depth180 inches (457 cm)
Loading height111 inches (281 cm)
Bucket rotation200°
Reach from pivot207 inches (525 cm)
2-Foot flat digging depth171 inches (434 cm)
Transmission
8-speedPower Director, 8 forward and 2 reverse
4-speed gearType gear, 4 forward and 1 reverse
4-speed shuttleType shuttle, 4 forward and reverse, Clutch wet disc
Transmission options4-speed gear, 8-speed, 4-speed shuttle
Tractor hitch
Controlposition control and lower-link draft sensing
Rear TypeI
Power Take-off (PTO)
Rear PTOlive
Engine RPM1000@1670
Rear PTO Type1000 (1.375)