AGCO

AGCO ST30

The AGCO ST30 is a compact utility tractor built by Iseki and distributed by AGCO from 2001 to 2004. It features a 1.5L 3-cylinder liquid-cooled diesel engine producing 30.3 hp gross and 29.1 hp net. The tractor offers both 9-speed gear and hydrostatic transmissions, four-wheel drive, mechanical rear differential lock, power steering, and wet disc brakes. It has a two-post folding ROPS and is built in Matsuyama, Japan. The ST30 supports various attachments including mid-mount mower decks, front-end loaders, and backhoes, making it versatile for multiple tasks.
Power30 hp
Founded2001 - 2004
ModelST30

Technical Specifications

Detailed specifications and technical data for AGCO ST30

Power
Engine (net)29.1 hp (21.7 kW)
Engine (gross)30.3 hp (22.6 kW)
Gear PTO (claimed)24.5 hp (18.3 kW)
Hydro PTO (claimed)22.3 hp (16.6 kW)
Engine
Typediesel
ModelIseki E3CD
Torque71.6 lb-ft (97.1 Nm)
Coolingliquid-cooled inline
Starterelectric
Idle RPM950-2750
Cylinders3-cylinder
Rated RPM2500
Torque RPM1800
Air cleanerdry
Bore/Stroke3.43x3.31 inches (87 x 84 mm)
Fuel systemindirect injection
Power (net)29.1 hp (21.7 kW)
Pre-heatingglow plugs
Displacement91.4 ci (1.5 L)
Oil capacity5 qts (4.7 L)
Power (gross)30.3 hp (22.6 kW)
Starter volts12
Coolant capacity7.5 qts (7.1 L)
Compression ratio21.8
Capacity
Fuel6.1 gal (23.1 L)
Hydraulic system3.2 gal (12.1 L)
Variants
1235similar Massey Ferguson model
Electrical
Groundnegative
Battery CCA582
Battery volts12
Charging amps40
Charging systemalternator
Hydraulics
Typeopen center
Capacity3.2 gal (12.1 L)
Pressure2130 psi (146.9 bar)
Pump flow6.0 gpm (22.7 lpm)
Total flow8.5 gpm (32.2 lpm)
Steering flow2.5 gpm (9.5 lpm)
Steering pressure1707 psi (117.7 bar)
Mechanical
ROPSTwo-post folding
BrakesWet disc brakes
Final drivesspur gear
Power steeringyes
Four-wheel driveyes
Differential lockmechanical rear
Production
TypeCompact Utility tractor
SeriesST Series
Built inMatsuyama, Japan
DistributorAGCO
ManufacturerIseki
Years produced2001 - 2004
Attachments
BackhoeAGCO SH16 Backhoe, Weight: 753 lbs (341 kg), Transport height: 63.8 inches (162 cm), Bucket width: 10 inches (25 cm), 12 inches (30 cm), 16 inches (40 cm), 2-Foot flat digging depth: 78.9 inches (200 cm), Reach from pivot: 100.3 inches (254 cm), Bucket Rotation: 165°, Swing Arc: 180°
Front-end loaderSL44 Loader, 960 lbs lift (full at pin) (435 kg), 785 lbs lift (full at 500mm) (356 kg), 1145 lbs breakout (bucket) (519 kg), 44° dump, 16 inches reach (dumped) (40 cm), 52 inches reach (ground) (132 cm), 17° rollback, 90 inches height (at pin) (228 cm), 71 inches clearance (dumped) (180 cm), boom cyl: 2.0 inches (5 cm), bucket cyl: 1.5 inches (3 cm), weight: 570 lbs (258 kg), Bucket width: 60 inches (152 cm)
60" mid-mount mower deckAGCO SM60, 60 inches (152 cm), Total width: 73.5 inches (186 cm), 3-blade, right-discharge, Cut height: 2 to 4 inch (5 to 10 cm), Weight: 393 lbs (178 kg)
72" mid-mount mower deckAGCO SM71, 72 inches (182 cm), 3-blade, right-discharge, Cut height: 1.5 to 3.5 inch (3 to 8 cm)
Transmission
Gears9 forward and 3 reverse
Clutch225mm mechanical dry disc
Options9-speed gear, hydrostatic
Gear typegear
Hydrostaticinfinite forward and reverse (3-range)
Tractor hitch
Controlposition control
Rear Armsfixed link ends with turn-buckle stabilizers
Rear TypeI
Draft controlOptional
Rear lift (at ends)1984 lbs (899 kg)
Rear lift (at 24"/610mm)1201 lbs (544 kg)
Dimensions & Tires
Width55.5 inches (140 cm)
Length116.5 inches (295 cm)
Wheelbase65.6 inches (166 cm)
Max weight4186 lbs (1898 kg)
Rear tread43.1 inches (109 cm)
Front tread37.8 inches (96 cm)
Height (ROPS)79.3 inches (201 cm)
Lawn/turf rear315/80D-16, 13.6-16
Industrial rear12.5/80-18
Lawn/turf front24x8.50-12, 27x8.50-15
Shipping weight2594 lbs (1176 kg)
Industrial front25x8.50-14
Standard tires (ag)Front: 6.00-14. Rear: 12.4-16
Power Take-off (PTO)
Clutchdry disc
Mid PTOlive (Optional)
Rear PTOlive (gear), independent (hydro)
Mid PTO TypeSAE 15 1.0
Rear PTO Type540 (1.375)
Engine RPM (mid PTO)2000@2482
Engine RPM (rear PTO)540@2327