AGCO

AGCO ST32

The AGCO ST32 is a compact utility tractor built by Iseki and distributed by AGCO from 2001 to 2004. It features a 33 hp liquid-cooled 3-cylinder diesel engine, hydrostatic transmission with infinite forward and reverse speeds in 3 ranges, and four-wheel drive with mechanical rear differential lock. The tractor includes power steering, wet disc brakes, and a two-post folding ROPS. It has an open center hydraulic system with 2134 psi pressure and a 7.7 gpm pump flow. The rear hitch is an I-type with position control and optional draft control, capable of lifting 2425 lbs at the ends. The PTO system includes independent rear and mid PTOs with electro-hydraulic clutch. Dimensions include a 65.6 inch wheelbase, 116.5 inch length, and a shipping weight of 2642 lbs. The tractor supports the SL44 front-end loader attachment with a 960 lbs lift capacity and 1145 lbs breakout force.
Power33 hp
Founded2001 - 2004
ModelST32

Technical Specifications

Detailed specifications and technical data for AGCO ST32

Power
PTO (claimed)25.9 hp (19.3 kW)
Engine (gross)33 hp (24.6 kW)
Tires
Industrial rear12.5/80-18
Engine
Typediesel
ModelIseki E3CD
Coolingliquid-cooled
Starterelectric
Cylinders3-cylinder
Fuel tank6.1 gal (23.1 L)
Rated RPM2600
Air cleanerdry
Bore/Stroke3.43x3.31 inches (87 x 84 mm)
Fuel systemindirect injection
Displacement91.4 ci (1.5 L)
Power (gross)33 hp (24.6 kW)
Starter volts12
Dimensions
Width51 inches (129 cm)
Length116.5 inches (295 cm)
Wheelbase65.6 inches (166 cm)
Rear tread37.8 inches (96 cm)
Front tread42.5 inches (107 cm)
Height (ROPS)79.3 inches (201 cm)
Shipping weight2642 lbs (1198 kg)
Height (Folded ROPS)68.3 inches (173 cm)
Electrical
Groundnegative
Battery volts12
Hydraulics
Typeopen center
Pressure2134 psi (147.1 bar)
Pump flow7.7 gpm (29.1 lpm)
Total flow10.4 gpm (39.4 lpm)
Steering flow2.7 gpm (10.2 lpm)
Mechanical
ROPSTwo-post folding
Final drivesspur gear
Power steeringyes
Wet disc brakesyes
Four-wheel driveyes
Differential lockmechanical rear
Production
TypeCompact Utility tractor
Built byIseki
DistributorAGCO
ManufacturerIseki
Years produced2001 - 2004
Attachments
LoaderSL44 Loader
Dump time2.2s
Dump angle44°
Lower time3.2s
Raise time5.5s
Bucket width60 inches (152 cm)
Rollback time2.2s
Reach (dumped)16 inches (40 cm)
Reach (ground)52 inches (132 cm)
Rollback angle17°
Height (at pin)90 inches (228 cm)
Clearance (dumped)71 inches (180 cm)
Breakout force (bucket)1145 lbs (519 kg)
Lift capacity (full at pin)960 lbs (435 kg)
Transmission
Typehydrostatic
Gearsinfinite forward and reverse (3-range)
Tractor hitch
Controlposition control
Rear Armsfixed link ends with telescopic stabilizer
Rear TypeI
Draft controlOptional
Rear lift (at ends)2425 lbs (1099 kg)
Power Take-off (PTO)
Clutchelectro-hydraulic
Mid PTOindependent
Rear PTOindependent
Engine RPM2000@2600
Mid PTO TypeSAE 15 1.0
Rear PTO Type540 (1.375)