Tractorpedia.com

Allis Chalmers 714C

Allis Chalmers 714C tractor
View Images
The Allis Chalmers 714C is a backhoe loader tractor produced from 1982 to 1984 as part of the 700C Series. It features a 65 hp turbocharged 4-cylinder diesel engine, a 4-speed torque converter transmission by Warner, and two-wheel drive with inboard planetary final drives. The tractor includes power steering, mechanical wet disc brakes, and a four-post ROPS/FOPS for operator safety. It has a fuel capacity of 20 gallons and a hydraulic system capacity of 27 gallons with an open center type hydraulic system. The 714C has a wheelbase of 84 inches and measures 282 inches in length, 83 inches in width, and 99 inches in height with ROPS. The backhoe attachment offers a digging depth of 170 inches and a swing arc of 180 degrees. The front-end loader can lift 4700 lbs at full pin height with a breakout force of 7500 lbs. Electrical system includes a 12-volt battery and a 42 amp alternator. The serial number plate is located on the left side of the frame behind the engine bay.
Allis Chalmers 714Cbackhoe loadertractor specs65 hp700C Seriesturbocharged diesel engine4-speed torque converterloaderbackhoe
Power-
Founded-
Model714C

Technical Specifications

Detailed specifications and technical data for Allis Chalmers 714C

Power

Engine power:65 hp (48.5 kW)

Tires

Rear tire:16.9-24
Front tire:11L-16

Engine

Type:turbocharged diesel
Model:Allis-Chalmers 433T
Power:65 hp (48.5 kW)
Cooling:liquid-cooled inline
Starter:electric
Idle RPM:775-2580
Cylinders:4-cylinder
Rated RPM:2300
Bore/Stroke:3.875x4.25 inches (98 x 108 mm)
Fuel system:direct injection
Displacement:200 ci (3.3 L)
Firing order:1-3-4-2
Oil capacity:12 qts (11.4 L)
Starter volts:12
Coolant capacity:16 qts (15.1 L)
Compression ratio:14.1:1
Oil change interval:100 h

Capacity

Fuel tank:20 gal (75.7 L)
Hydraulic system:27 gal (102.2 L)

Dimensions

Width:83 inches (210 cm)
Length:282 inches (716 cm)
Wheelbase:84 inches (213 cm)
Rear tread:65 inches (165 cm)
Front tread:67 inches (170 cm)
Height (ROPS):99 inches (251 cm)
Ground clearance:13.25 inches (33 cm)
Height (backhoe):136 inches (345 cm)

Electrical

Ground:negative
Batteries:1
Battery CCA:95
Battery Group:30H
Battery volts:12
Charging amps:42
Charging system:alternator
Optional batteries:2
Optional charging amps:61

Hydraulics

Type:open center
Capacity:27 gal (102.2 L)
Total flow:29 gpm (109.8 lpm)
Steering flow:5 gpm (18.9 lpm)
Steering pressure:1500 psi (103.4 bar)

Mechanical

Drive:Two-wheel drive
Brakes:Mechanical wet disc brakes
ROPS/FOPS:Four-post ROPS/FOPS
Final drives:inboard planetary
Power steering:Yes

Production

Type:Backhoe loader tractor
Series:700C Series
Manufacturer:Allis Chalmers
Years produced:1982 - 1984

Attachments

Backhoe:Allis Chalmers 714C Backhoe
Dump time:2s
Lower time:3s
Raise time:5s
Rollback time:2s
Front-end loader:700C Loader
Backhoe swing arc:180°
Boom rod diameter:1.75 inches (4 cm)
Loader dump angle:45°
Bucket rod diameter:1.50 inches (3 cm)
Backhoe bucket force:10100 lbs (4581 kg)
Backhoe digging depth:170 inches (431 cm)
Loader breakout force:7500 lbs (3402 kg)
Loader reach (dumped):30 inches (76 cm)
Backhoe loading height:123 inches (312 cm)
Boom cylinder diameter:3.25 inches (8 cm)
Loader height (at pin):125 inches (317 cm)
Backhoe reach from pivot:211 inches (535 cm)
Backhoe transport height:136 inches (345 cm)
Bucket cylinder diameter:2.50 inches (6 cm)
Backhoe dipperstick force:7040 lbs (3193 kg)
Loader clearance (dumped):104 inches (264 cm)
Loader rollback (ground line):40°
Loader lift capacity (full at pin):4700 lbs (2131 kg)

Transmission

Type:torque converter
Gears:4 forward and reverse
Manufacturer:Warner

Serial Numbers

Location:Serial number plate on the left side of the frame, just behind the engine bay.

Backhoe & Loader

Dig depth:170 inches (431 cm)
Dump time:2s
Dump angle:45 degrees
Lower time:3s
Raise time:5s
Backhoe type:Allis Chalmers 714C Backhoe
Rollback time:2s
Backhoe swing arc:180°
Boom rod diameter:1.75 inches (4 cm)
Bucket rod diameter:1.50 inches (3 cm)
Backhoe bucket force:10100 lbs (4581 kg)
Backhoe digging depth:170 inches (431 cm)
Loader reach (dumped):30 inches (76 cm)
Backhoe loading height:123 inches (312 cm)
Boom cylinder diameter:3.25 inches (8 cm)
Loader height (at pin):125 inches (317 cm)
Backhoe reach from pivot:211 inches (535 cm)
Backhoe transport height:136 inches (345 cm)
Bucket cylinder diameter:2.50 inches (6 cm)
Backhoe dipperstick force:7040 lbs (3193 kg)
Loader clearance (dumped):104 inches (264 cm)
Loader rollback (ground line):40 degrees

Related Models

Allis Chalmers 715C

Model:715C

Allis Chalmers 714B

Model:714B