Allis Chalmers industrial tractors

Allis Chalmers 715C

The Allis Chalmers 715C is a backhoe loader tractor produced from 1982 to 1984 as part of the 700C Series. It features a 65 hp turbocharged 4-cylinder diesel engine, a 4-speed torque converter transmission, and two-wheel drive with inboard planetary final drives. The tractor includes power steering, mechanical wet disc brakes, and a four-post ROPS/FOPS for operator safety. It has a fuel capacity of 20 gallons and a hydraulic system capacity of 27 gallons with an open center system. The 715C is equipped with a 700C front-end loader and an Allis Chalmers 715C backhoe, offering substantial digging depth and lifting capabilities. Tires are industrial size 11L-16 front and 16.9-24 rear. Electrical system features a 12-volt negative ground with an alternator charging system.
Power-
Founded-
Model715C

Technical Specifications

Detailed specifications and technical data for Allis Chalmers 715C

Power
Engine power65 hp (48.5 kW)
Tires
Industrial rear16.9-24
Industrial front11L-16
Engine
Typeturbocharged diesel
ModelAllis-Chalmers 433T
Power65 hp (48.5 kW)
Coolingliquid-cooled inline
Starterelectric
Idle RPM775-2580
Cylinders4-cylinder
Rated RPM2300
Bore/Stroke3.875x4.25 inches (98 x 108 mm)
Compression14.1:1
Fuel systemdirect injection
Displacement200 ci (3.3 L)
Firing order1-3-4-2
Oil capacity12 qts (11.4 L)
Starter volts12
Coolant capacity16 qts (15.1 L)
Oil change interval100 h
Capacity
Fuel20 gal (75.7 L)
Hydraulic system27 gal (102.2 L)
Dimensions
Width83 inches (210 cm)
Length282 inches (716 cm)
Wheelbase84 inches (213 cm)
Rear tread65 inches (165 cm)
Front tread67 inches (170 cm)
Height (ROPS)99 inches (251 cm)
Ground clearance13.25 inches (33 cm)
Height (backhoe)136 inches (345 cm)
Operating weight14200 lbs (6441 kg)
Electrical
Groundnegative
Batteries1 (2 Optional)
Battery CCA95
Battery Group30H
Battery volts12
Charging amps42 (61 Optional)
Charging systemalternator
Hydraulics
Typeopen center
Capacity27 gal (102.2 L)
Total flow29 gpm (109.8 lpm)
Steering flow5 gpm (18.9 lpm)
Steering pressure1500 psi (103.4 bar)
Mechanical
DriveTwo-wheel drive
BrakesMechanical wet disc brakes
ROPS/FOPSFour-post ROPS/FOPS
Final drivesinboard planetary
Power steeringYes
Production
TypeBackhoe loader tractor
Series700C Series
Years made1982 - 1984
ManufacturerAllis Chalmers
Attachments
Dump time2s
Lower time3s
Raise time5s
Backhoe typeAllis Chalmers 715C Backhoe
Rollback time2s
Front-end loader700C Loader
Backhoe swing arc180°
Boom rod diameter1.75 inches (4 cm)
Loader dump angle45°
Bucket rod diameter1.50 inches (3 cm)
Backhoe bucket force10100 lbs (4581 kg)
Loader lift capacity4700 lbs (2131 kg) lift (full at pin)
Backhoe digging depth176 inches (447 cm)
Loader breakout force7500 lbs (3402 kg)
Loader reach (dumped)30 inches (76 cm)
Backhoe loading height130 inches (330 cm)
Boom cylinder diameter3.25 inches (8 cm)
Loader height (at pin)125 inches (317 cm)
Backhoe reach from pivot223 inches (566 cm)
Backhoe transport height136 inches (345 cm)
Bucket cylinder diameter2.50 inches (6 cm)
Backhoe dipperstick force7920 lbs (3592 kg)
Loader clearance (dumped)104 inches (264 cm)
Loader rollback (ground line)40°
Transmission
Typetorque converter
Gears4 forward and reverse
ManufacturerWarner
Serial Numbers
LocationSerial number plate on the left side of the frame, just behind the engine bay.
Backhoe & Loader
Dig depth176 inches (447 cm)
Dump angle45 inches (114 cm)