Allis Chalmers industrial tractors

Allis Chalmers 715B

The Allis Chalmers 715B is a backhoe loader tractor produced from 1978 to 1980. It features a Perkins 3.9L 4-cylinder diesel engine delivering 72 hp gross and 65 hp net power. The tractor has a 4-speed torque converter transmission by Warner and is equipped with two-wheel drive, power steering, and mechanical wet disc brakes. It has a four-post ROPS with an optional cab and heater. The hydraulic system is open center with a capacity of 27 gallons and a pressure of 2450 psi. The 715B has a wheelbase of 84 inches, weighs 13,000 lbs, and uses 11Lx16 front tires and 16.9x24 rear tires. The backhoe attachment offers a digging depth of 180 inches and a swing arc of 180°, while the loader can lift 4700 lbs at full pin height with a 45° dump angle. Electrical system includes a 12-volt battery and a 42 amp alternator.
Power-
Founded-
Model715B

Technical Specifications

Detailed specifications and technical data for Allis Chalmers 715B

Power
Engine (net)65 hp (48.5 kW)
Engine (gross)72 hp (53.7 kW)
Engine
Typediesel, 4-cylinder, liquid-cooled
ModelPerkins 4.236
Torque186 lb-ft (252.2 Nm)
Starterelectric
Rated RPM2250
Torque RPM1400
Bore/Stroke3.875x5.00 inches (98 x 127 mm)
Compression16:1
Power (net)65 hp (48.5 kW)
Displacement236 ci (3.9 L)
Oil capacity12 qts (11.4 L)
Power (gross)72 hp (53.7 kW)
Starter volts12
Coolant capacity20 qts (18.9 L)
Weight
Operating13000 lbs (5896 kg)
Max rear axle12500 lbs (5670 kg)
Max front axle12500 lbs (5670 kg)
Capacity
Fuel20 gal (75.7 L)
Hydraulic system27 gal (102.2 L)
Electrical
Groundnegative
Battery volts12
Charging amps42
Charging systemalternator
Hydraulics
Typeopen center
Capacity27 gal (102.2 L)
Pressure2450 psi (168.9 bar)
Pump flow18 gpm (68.1 lpm)
Steering flow5 gpm (18.9 lpm)
Additional flow11.3 gpm (42.8 lpm)
Steering pressure1250 psi (86.2 bar)
Mechanical
ROPSFour-post ROPS. Cab optional with heater.
DriveTwo-wheel drive
BrakesMechanical wet disc brakes
SteeringPower steering
Production
TypeBackhoe loader tractor
ManufacturerAllis Chalmers
Years produced1978 - 1980
Attachments
Loader4700 lbs lift (full at pin) (2131 kg), 7500 lbs breakout (3402 kg), 45° dump, 30 inches reach (dumped) (76 cm), 40° rollback (ground line), 125 inches height (at pin) (317 cm), 104 inches clearance (dumped) (264 cm), raise: 5s, dump: 2s, lower: 3s, rollback: 2s
BackhoeBackhoe type: Allis Chalmers Backhoe, Transport height: 136 inches (345 cm), Digging depth: 180 inches (457 cm), Reach from pivot: 222 inches (563 cm), Loading height: 129 inches (327 cm), Swing Arc: 180°, Bucket force: 10000 lbs (4536 kg), Dipperstick force: 6900 lbs (3129 kg)
Attachment overviewFront-end loader, Backhoe
Transmission
Typetorque converter
Gears4 forward and reverse
TransmissionWarner
Backhoe & Loader
Dig depth180 inches (457 cm)
Dump angle45 inches (114 cm)
Dimensions & Tires
Width83 inches (210 cm)
Length282 inches (716 cm)
Rear tire16.9x24
Wheelbase84 inches (213 cm)
Front tire11Lx16
Rear tread65 inches (165 cm)
Front tread67 inches (170 cm)
Height (ROPS)99 inches (251 cm)
Ground clearance13.25 inches (33 cm)
Height (backhoe)136 inches (345 cm)